Arduino
0.96″ OLED Display Module (128×64) – Yellow Blue I2C Screen for Arduino Projects
160,00 EGP-
- Size: 0.96 inch
- Resolution: 128 x 64
- Controlling Chip: SSH1106
- Display Area: 21.74 x 10.86mm
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 celsius
- Interface Type: IIC
- Light Color: Yellow
[wpdm_package id=’16132′] [wpdm_package id=’16133′] [wpdm_package id=’16134′] [wpdm_package id=’16135′]
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
230,00 EGP- 🔁 16-channel PWM control (12-bit resolution)
- 🔌 I2C interface – only 2 pins needed
- 🧠 Chain up to 62 modules (992 outputs total)
- ⚙️ Adjustable PWM frequency (up to 1.6 kHz)
- ⚡ 3.3V and 5V logic compatible
- 🔧 Output enable pin for quick shutdown
- 🛡️ Reverse polarity protection
- 💡 Power indicator LED
- 🧩 Plug in up to 16 servos directly
2.4 inch LCD Display TFT Touch Screen Shield 240×320 18-bit SPFD5408 Display Controller Arduino UNO R3/Mega2560
550,00 EGP2.4-inch 240×320 TFT touch screen shield for Arduino UNO and Mega2560.
2WD Smart Robot Car Chassis for Arduino
325,00 EGP- 🤖 2WD smart robot car chassis kit for Arduino projects
- 🧱 2-layer acrylic chassis for stronger build and more space
- ⚙️ Supports 2 DC geared motors for differential drive
- 🧩 Plenty of mounting holes for sensors and modules
- 🔋 Space for battery pack and control boards
- 🛠️ Easy assembly—ideal for beginners and STEM learning
- 🚗 Perfect base for line follower, obstacle avoider, and RC bots
- ✅ Great platform for robotics experiments and competitions
AMS1117 3.3V Voltage Regulator Power Module – 800mA Output for Arduino & Microcontrollers
20,00 EGP-
Regulated 3.3 V Output ideal for powering sensors and microcontrollers
-
800 mA Maximum Current suitable for moderate-load electronics
-
Onboard Capacitors for stable voltage with minimal ripple
-
Compact PCB Module easy to integrate into DIY circuits
-
Standard Input Range supports up to ~12 V input voltage
Arduino Nano 3.0 Controller Board – FT232
290,00 EGP- Based on ATmega328 microcontroller
- FT232 USB-to-Serial driver for stable PC communication
- Compact and breadboard-friendly design
- 22 total I/O pins (14 Digital, 8 Analog)
- Supports serial, I2C, and SPI communication
- Onboard voltage regulator (5V & 3.3V)
- Preloaded with Arduino bootloader for easy programming
- Ideal for IoT, robotics, sensors, and embedded systems
Arduino Nano Cable – USB 2.0 A to USB 2.0 Mini B
25,00 EGP- Compatible with Arduino Nano V3 (Mini USB port)
- USB 2.0 A to Mini-B 5-pin connector
- Supports data transfer rates up to 480 Mbps
- Compact 30cm length – perfect for desktop setups
- Plug-and-play; no drivers needed
Arduino Nano Type-C USB
250,00 EGP- Model Name/Number Arduino NANO
- Memory 32 KB of Which 2 KB Used By Bootloader
- Processor ATmega328
- USB 2.0 Ports Mini USB
- No. Of Cores Single
- Digital I/O Pin 22
- Weight 7g
Arduino Nano V3.0 CH340 Chip Board,Atmega328P
250,00 EGP- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.

























