The JF-0530B is a 12V DC push-pull solenoid electromagnet, drawing 300mA and providing a 10mm stroke to generate linear mechanical motion when energized.
As a push-pull type, it can be wired to either push or pull depending on the mounting orientation, making it adaptable for latching, locking, or actuator mechanisms. It’s rated at 6N of force.
A compact electromagnetic actuator suited for DIY locking mechanisms, small actuator projects, and other applications needing a simple linear push/pull motion on demand.
Features:
Push-pull solenoid electromagnet
Operating voltage: 12V DC
Current draw: 300mA
Stroke length: 10mm
Rated force: 6N
Suited for locking and actuator mechanisms
🔌
Pin Connections
1 Table
Pin Connections Table 1
Board
Sensor Pin
Connection
Solenoid
to switching transistor/relay
coil leads into a flyback-diode-protected switch, gated by a board digital pin
📟
JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet
JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet - Arduino Uno
JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet - Arduino Nano
JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet - Arduino Mega
JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet - ESP32
JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet - ESP8266
JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet - STM32
JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet - Raspberry Pi Pico
📄 File: jf-0530b_12v_dc_12_v_300ma_10mm_6n_push_pull_solenoid_electromagnet_-_arduino_uno.inoArduino Uno
554 characters
1//ekostra.com
2//electronics store in egypt
3//+201008896258
4
5// JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet draws too much current for a GPIO pin directly - switch it through a flyback-diode-protected transistor or relay, gated by pin 7 on Arduino Uno.
5// JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet draws too much current for a GPIO pin directly - switch it through a flyback-diode-protected transistor or relay, gated by pin 7 on Arduino Nano.
6#define SOLENOID_PIN 7
7
8voidsetup() {
9Serial.begin(115200);
10pinMode(SOLENOID_PIN, OUTPUT);
11digitalWrite(SOLENOID_PIN, LOW);
12}
13
14voidloop() {
15digitalWrite(SOLENOID_PIN, HIGH); // energize
16delay(1000);
17digitalWrite(SOLENOID_PIN, LOW); // release
18delay(3000);
19}
📄 File: jf-0530b_12v_dc_12_v_300ma_10mm_6n_push_pull_solenoid_electromagnet_-_arduino_mega.inoArduino Mega
555 characters
1//ekostra.com
2//electronics store in egypt
3//+201008896258
4
5// JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet draws too much current for a GPIO pin directly - switch it through a flyback-diode-protected transistor or relay, gated by pin 7 on Arduino Mega.
5// JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet draws too much current for a GPIO pin directly - switch it through a flyback-diode-protected transistor or relay, gated by pin 13 on ESP32.
5// JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet draws too much current for a GPIO pin directly - switch it through a flyback-diode-protected transistor or relay, gated by pin D3 on ESP8266.
5// JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet draws too much current for a GPIO pin directly - switch it through a flyback-diode-protected transistor or relay, gated by pin PB2 on STM32.
6#define SOLENOID_PIN PB2
7
8voidsetup() {
9Serial.begin(115200);
10pinMode(SOLENOID_PIN, OUTPUT);
11digitalWrite(SOLENOID_PIN, LOW);
12}
13
14voidloop() {
15digitalWrite(SOLENOID_PIN, HIGH); // energize
16delay(1000);
17digitalWrite(SOLENOID_PIN, LOW); // release
18delay(3000);
19}
📄 File: jf-0530b_12v_dc_12_v_300ma_10mm_6n_push_pull_solenoid_electromagnet_-_raspberry_pi_pico.inoRaspberry Pi Pico
562 characters
1//ekostra.com
2//electronics store in egypt
3//+201008896258
4
5// JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet draws too much current for a GPIO pin directly - switch it through a flyback-diode-protected transistor or relay, gated by pin 17 on Raspberry Pi Pico.
6#define SOLENOID_PIN 17
7
8voidsetup() {
9Serial.begin(115200);
10pinMode(SOLENOID_PIN, OUTPUT);
11digitalWrite(SOLENOID_PIN, LOW);
12}
13
14voidloop() {
15digitalWrite(SOLENOID_PIN, HIGH); // energize
16delay(1000);
17digitalWrite(SOLENOID_PIN, LOW); // release
18delay(3000);
19}
Electromagnetic actuator - simple on/off (energize/release), switched through a transistor or relay, not PWM-speed-controlled like a motor.
نظرة عامة ومواصفات المنتج — بالعربية
JF-0530B 12V DC 12 V 300mA 10mm 6N Push Pull Solenoid Electromagnet متوفر الآن في متجر إكوسترا للإلكترونيات، ضمن قسم Motors | Drivers | Pumps | Actuators، بسعر 24,55 EGP. كود المنتج لدينا: EK1352. المنتج متوفر في المخزون وجاهز للشحن الفوري لكل محافظات مصر مع إمكانية الدفع عند الاستلام.
أهم المواصفات الفنية:
الموديل: JF-0530B
Operating Voltage: 12V DC
Current Draw: 300mA
Stroke Length: 10mm
Rated Force: 6N
Type: Push-Pull Solenoid Electromagnet
الوزن: 1 g
منتج أصلي بجودة مضمونة من إكوسترا، مع دعم فني ومتابعة بعد البيع لكل عملائنا في مصر.