Shop
DC Motor With Gear Box JGA25-370-12V-33RPM 30Kg.cm
400,00 EGP- High torque up to 30Kg·cm
- Low speed 33RPM for precise control
- Durable metal gearbox design
- Compact and robust construction
- Reversible CW/CCW rotation
- Easy integration with motor drivers
- Ideal for robotics and automation projects
DC Motor with Gear Box JGA25-370-12V-50RPM 25Kg.cm
400,00 EGP- High torque up to 25Kg·cm
- 50RPM speed for balanced performance
- Durable metal gearbox construction
- Smooth and stable operation
- Reversible CW/CCW rotation
- Easy integration with motor drivers
- Ideal for robotics and automation projects
DC Power Connectors 5.5mm Jack Adapter
10,00 EGP- 🔌 DC power connector adapter with 5.5mm barrel jack
- ⚡ Standard 5.5mm interface for DC power supplies
- 🧩 Ideal for CCTV, LED strips, routers, and DIY electronics
- 🛠️ Easy plug-and-play connection for quick wiring
- 🔩 Secure fit for stable power and less disconnection
- 📦 Compact size—great for prototyping and repairs
- 🔁 Commonly used for power extensions and adapters
- ✅ Useful accessory for any DC power project
DC-005 5.5×2.1mm Female DC Power Jack Supply Socket
10,00 EGP- 🔌 DC-005 female DC power jack socket (5.5×2.1mm)
- ⚡ Standard size for most DC adapters and power supplies
- 🧩 Ideal for DIY electronics, routers, CCTV, and LED projects
- 🛠️ Through-hole pins for easy PCB mounting and soldering
- 🔩 Secure, stable connection for reliable power input
- 📦 Compact socket—fits well in small enclosures
- 🔁 Great for repairs and replacing broken DC input jacks
- ✅ Compatible with 5.5×2.1mm male barrel plugs
DC-022 Panel Mount DC Power Jack Socket (5.5mm x 2.1mm Female)
7,00 EGP- Panel-mount DC power jack for 5.5×2.1mm plugs
- Threaded body with hex nut for secure installation
- Three solder terminals including switched contact
- Rated up to 30V DC, 0.5–1A current (variants up to 5A)
- Durable thermoplastic housing and metal contacts
- Ideal for DIY electronics, LED lighting, audio gear, and repairs
DC-DC Step-Up Power Converter Module XL6009
65,00 EGP- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v;
Desoldering Pump
45,00 EGP-
Efficient manual solder removal for electronics
-
Spring-loaded plunger for quick operation
-
Durable plastic or aluminum body (model dependent)
-
Compact and lightweight handheld design
-
Anti-static safe – suitable for sensitive components
-
Reusable and easy to clean
-
Ideal for DIY repair, prototyping, and soldering practice
DHT11 Temperature And Humidity Sensor Module with LED
60,00 EGP- 📦 DHT11 sensor on PCB with LED indicator
- 🔌 Operates on 3–5V, 4-pin header (0.1″ spacing)
- 🔧 Built-in pull-up resistor (4.7K or 10K)
- 💧 Humidity: 20–80% (±5%)
- 🌡️ Temp: 0–50°C (±2°C)
- 🔋 Low power use: max 2.5mA during conversion
DHT22 Digital Temperature & Humidity Sensor Module for Arduino DIY Projects Black module
210,00 EGP- 🌡️ Measures temperature and humidity
- 📏 High accuracy (±0.5°C, ±2–5% RH)
- 🧪 Calibrated digital output
- 🔧 No external components needed
- ⚡ Low power consumption
- 🔁 1 reading every 2 seconds
- 🔌 Long-distance signal transmission
- 🧠 Fully factory calibrated and compensated
DHT22 Digital Temperature & Humidity Sensor Module for Arduino DIY Projects Red module
210,00 EGP- 6-pin ON/OFF switch for PCB mounting
- Compact design for tight spaces
- Reliable and durable construction
- Easy to integrate into various circuits
- Ideal for DIY and electronic applications
DIY Metal Detector Kit: DC 3V-5V, 60mm Non-Contact Sensor Module
150,00 EGP-
Complete DIY kit for building a basic metal detector
-
Includes all required electronic components and PCB
-
Built-in detection coil integrated on the high-quality PCB
-
Component values and positions clearly marked on the board
-
Ideal for learning electronics, experimentation, and STEM projects
-
Suitable for applications like security checks, object detection, and fun DIY builds
-
Compact and easy to assemble – great for beginners and hobbyists
DIY Mini Electric Boost Kit – 1000KV Step-Up
302,00 EGP- Complete bundle: booster, charger, battery, holder & switch
- 1000KV step-up for efficient voltage boost
- TP4056 charger with overcharge/short circuit protection
- Compact and lightweight for easy integration
- Great for DIY electronics and robotics
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
