Shop
New
LM35DZ Temperature Sensor Chinese
75,00 EGP- 🎯 Calibrated in Celsius (°C)
- 📏 10.0 mV/°C linear output
- ✅ ±0.5°C accuracy at 25°C
- 🔋 Operating voltage: 4V–30V
- 🔌 Ultra-low current: <60 µA
- 🔥 Low self-heating: 0.08°C
- 🧪 Minimal non-linearity: 0.25°C
- 📤 Low output impedance: 0.1Ω
LM386 Wide Input Voltage Low Power Audio Amplifier DIP-8
8,00 EGP- 🔊 Low-power audio amplifier IC in DIP-8 package
- ⚡ Wide input voltage range for flexible powering
- 🎚️ Adjustable gain for clean volume control
- 🎧 Drives small speakers & headphone-level loads
- 📻 Ideal for radios, intercoms, alarms, and audio projects
- 🔇 Low quiescent current for battery-powered devices
- 🛠️ Minimal external components—easy to build quickly
- 📦 Breadboard-friendly DIP-8 for prototyping and learning
LM393 Dual Differential Comparator
8,00 EGP- ⚖️ Dual differential comparator (2 channels) in one IC
- ⚡ Wide operating voltage for flexible power designs
- 🔎 Accurate threshold detection for analog signals
- 🚪 Open-collector outputs—easy pull-up to 3.3V/5V logic
- 🧩 Perfect for sensor modules, level/over-voltage detection
- ⚡ Fast response for pulse and edge detection circuits
- 🛠️ Great for building Schmitt triggers and window comparators
- 📦 Easy to use in breadboard prototypes and embedded projects
LM555 Single Precision Timers
5,00 EGP- ⏲️ Timers and Delay Circuits
- 💡 LED Flashers and Blinkers
- 📶 Pulse Width Modulation (PWM)
- 📟 Tone Generation
- 🔄 Sequential Timing Circuits
- 🚨 Alarm Systems
- 🔁 Oscillators and Frequency Generators
lm741 Operational Amplifier
7,00 EGP✅ Classic General-Purpose Op-Amp
✅ ±22V dual supply or 44V single supply
✅ Internally compensated for unity gain
✅ Low input offset and bias current
✅ Ideal for filters, amplifiers, analog control
Load Cell Sensor 10Kg
125,00 EGP- Measures weight/force up to 10 kg with high precision
- Uses strain gauge technology with 4-wire Wheatstone bridge
- Made from durable aluminum alloy for reliable performance
- Easy to interface with HX711 24-bit ADC module for Arduino
- Operates on 5-10V driving voltage
- Compact design, simple installation with screw mount
- Ideal for electronic weighing scales and force measurement applications
Load Cell Sensor 1Kg
105,00 EGP- Measures weight/force up to 1 kg with high precision
- Uses strain gauge technology with 4-wire Wheatstone bridge
- Made from durable aluminum alloy for reliable performance
- Easy to interface with HX711 24-bit ADC module for Arduino
- Operates on 5-10V driving voltage
- Compact design, simple installation with screw mount
- Ideal for electronic weighing scales and force measurement applications
Load Cell Sensor 20Kg
180,00 EGP- Rated Load: 20Kg
- Rated Output: 1.0 ±0.15mV/V
- Zero Output: ±0.1mV/V
- Cree: 0.03%F.S./30min
- Input End: Red+, Black-
- Output End: Green+, White-
- Input Impedance: 1115±10% Ω
Load Cell Sensor 5Kg
120,00 EGP- Measures weight/force up to 5 kg with high precision
- Uses strain gauge technology with 4-wire Wheatstone bridge
- Made from durable aluminum alloy for reliable performance
- Easy to interface with HX711 24-bit ADC module for Arduino
- Operates on 5-10V driving voltage
- Compact design, simple installation with screw mount
- Ideal for electronic weighing scales and force measurement applications
M/F – 10cm Male to Female 1 Jumper Wire
0,75 EGP- Male-to-Female connectors – perfect for bridging modules and dev boards
- 10cm wire length – ideal for compact circuit setups
- Standard 2.54mm pitch – fits breadboards and header pins
- Flexible PVC insulation – resists wear and tear
- Copper conductor – ensures stable and strong signal transfer
- Reusable and solder-free – quick plug/unplug connections
- Color-coded (may vary) – for easy wiring identification
- Great for Arduino, Raspberry Pi, ESP32, and sensor projects
M/F – 30cm Male to Female 1 Jumper Wire
1,50 EGP- 📏 30cm length – ideal for extended circuits and flexible layouts
- 🔗 Male-to-Female ends – bridges male pins to female headers
- ⚙️ Standard 2.54mm pitch – fits Arduino, Raspberry Pi, ESP32, and more
- 🔁 Durable, reusable design – perfect for testing and prototyping
- 🔌 Plug-and-play – no soldering required
- 🧪 Flexible PVC insulation with copper conductors
M/M – 30cm Male to Male 1 Jumper Wire
1,50 EGP- 📏 30cm extended length – great for wide or modular circuit layouts
- 🔗 Male-to-Male connectors – fits female headers and breadboards
- ⚙️ 2.54mm standard pitch – compatible with Arduino, Raspberry Pi, ESP32, and more
- 🔁 Durable, flexible, and reusable – ideal for frequent prototyping
- 🔌 Easy plug-in connections – no soldering required
- 🧪 Flexible PVC insulation with copper/tinned copper core
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
