Shop
MOC3063 Zero-Crossing Optocoupler – 600V Triac Driver for Safe AC Load Control
15,00 EGP- Zero-Crossing Detection – Ensures low-noise switching and reduced EMI
- 600V Peak Voltage Handling – Ideal for switching high-voltage AC loads
- Low Trigger Current – Operates with typical 10mA LED current
- Optical Isolation – Withstands up to 5300V RMS between input and output
- Safe AC Switching – Protects microcontrollers and PLCs from AC surges
- Compact DIP-6 Package – Easy PCB integration and through-hole mounting
- Reliable Load Control – Perfect for lamps, motors, heaters, and industrial systems
- Wide Operating Range – -40°C to +100°C for industrial-grade environments
Monocrystalline 110*136mm 12V 200mA Small Solar Cell
450,00 EGP- 12 volt 2-watt poly crystalline solar panel .
- High conversion speed, high-efficiency output.
- Excellent low light effect.
- High transmittance tempered glass.
- A unique technique to prevent water frozen within the deforming framework.
- Small Epoxy Solar Panels are simple to install or add to your existing product.
Mounting for DC Motor JGA25-370-CE 3D Printed
45,00 EGP-
Designed for 25mm JGA25-370-CE gear motors
-
High-quality PLA/PETG 3D printed construction
-
Pre-drilled 3mm mounting holes
-
Stable, low-profile design (~20mm height)
-
Easy alignment using motor faceplate and side screws
-
Ideal for robotics, pan-tilt, or DIY mechanical projects
MP3-TF-16P SD Card MP3 Module with Serial Port
150,00 EGP- Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
- 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
- Fully supports FAT16, FAT32 file system
- Maximum support 32G TF card
- Support U disk to 32G, 64M bytes of NORFLASH
- A variety of control modes are available. IO control mode, serial mode, AD key control mode
MPU6500 6-Axis Attitude Gyro + Accelerometer Sensor Module | I²C/SPI Interface
300,00 EGP- Accelerometer, Gyroscope
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- 9 DOF modules
MQ-135 Air Quality/Gas Detector Sensor Module For Arduino
100,00 EGP- Detects multiple gases: NH₃, benzene, alcohol, CO₂, NOₓ, smoke
- Provides analog and digital outputs
- Operates at 5V DC
- Adjustable sensitivity via onboard potentiometer
- Requires preheating (~24 hours) for accurate readings
- Compact and easy to integrate
MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
85,00 EGP- Detects smoke, LPG, butane, hydrogen, and other combustible gases
- Provides analog and digital output signals
- Fast response and high sensitivity
- Compatible with Arduino and other microcontrollers
- Easy to calibrate and use in gas leak detection projects
- Operates at 5V power supply
- Ideal for safety and environmental monitoring systems
MQ-5 Gas Sensor Module
80,00 EGP- Detects LPG, methane, natural gas, and propane
- Dual output: analog and digital signals
- Operates at 5V with low power consumption
- Adjustable sensitivity via onboard potentiometer
- Fast response and recovery time
- Compact and easy to integrate
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
90,00 EGP- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
MT3608 DC-DC Adjustable Step-Up (Boost) Converter with USB Type-C (2A, 28V)
30,00 EGP-
Boosts low DC voltage to higher adjustable output
-
USB Type-C input for easy connectivity
-
Compact and lightweight module
-
High efficiency and stable performance
-
Built-in over-temperature and short-circuit protection
-
Ideal for battery-powered projects and portable electronics
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
