Shop
4PIN IR Infrared Flame Detection Sensor Module
35,00 EGPIR flame detection sensor module with adjustable sensitivity for Arduino and Raspberry Pi.
4WD Smart Robot Car Transparent Acrylic Chassis Kit
450,00 EGP- 🤖 4WD smart robot car chassis kit (transparent acrylic)
- ⚙️ 4-wheel drive design for better traction and stability
- 🧩 Plenty of mounting holes for Arduino, drivers, and sensors
- 🔋 Space for battery pack and control boards
- 🛠️ Easy assembly—great for beginners and STEM learning
- 🚗 Ideal for obstacle avoidance, line following, and RC robots
- 📦 Lightweight acrylic body with clean transparent look
- ✅ Perfect base for robotics experiments and competitions
5-Channel Flame Sensor Module
150,00 EGP- Detecting range: >120 degree
- Analog and digital outputs
- On-board potentiometer and indicators
- 1% resistors to make this module more reliable and precise
- Operating Voltage: 3.3V – 9V
- Board Diameter: 40 mm.
5-Pin Relay Holder Case Base for Breadboard (Unassembled)
30,00 EGPHigh RPM (~12000 at 5V) for dynamic mechanical tasks
500Ma Mini Solar Lipo Charger Board
100,00 EGP-
Based on CN3065 charge controller IC
-
Designed for single-cell LiPo battery charging
-
Solar panel input: 4.4V–6V
-
Max charging current: 500mA
-
Supports Micro-USB & solar input
-
JST-PH2.0 connectors for easy wiring
-
Battery status LEDs: Red (Charging), Green (Charged)
-
Built-in short circuit protection
-
Compact size, ideal for portable solar projects
-
Randomly shipped in HW-736 or equivalent version
560 ohm 1/4 Watt
0,25 EGP- Precision: Accurate 560 ohm resistance for stable circuit performance.
- Power Rating: 1/4 Watt, designed for low-power applications.
- Versatile: Perfect for DIY projects, audio systems, and general electronic circuits.
- Durable: High-quality build ensures long-lasting use in various electronics.
- Compact: Ideal for use on breadboards and in tight circuit designs.
56k ohm 1/4 Watt
0,25 EGP56k ohm 1/4 Watt Resistor (4pcs)
1. Resistance: 56 kΩ
2. Power Rating: 0.25 W
3. Package: Through-hole axial
4. Quantity: 4 per pack
56mm 4-Blade Plastic Propeller (Blue)
25,00 EGP- 🔵 Blue plastic propeller with 4 blades
- 📏 Size: 56mm for compact airflow/thrust applications
- 🌀 4-blade design for smoother airflow and better push
- ⚙️ Compatible with small DC motors (with matching shaft)
- 💨 Ideal for mini fans, RC models, and DIY experiments
- 📦 Lightweight build for efficient rotation
- 🛠️ Easy to mount using suitable motor adapters
- ✅ Great for STEM, robotics, and prototyping projects
5A range Current Sensor Module ACS712
100,00 EGP- ⚡ ACS712 current sensor module (5A range)
- 🔁 Measures AC/DC current with Hall-effect sensing
- 📈 Analog voltage output proportional to current
- 🧩 Ideal for Arduino/MCU current monitoring and protection
- 🛡️ Electrical isolation between load and measurement circuit
- ⚡ Low resistance conduction path for minimal power loss
- 🛠️ Easy wiring: VCC, GND, OUT + IP+/IP- terminals
- ✅ Great for power supplies, motors, and battery monitoring
5mm Blue DIP LED
1,00 EGP- Standard 5mm diameter LED
- Bright blue light emission
- Low power consumption
- Easy to mount on breadboards or PCBs (DIP package)
- Typical forward voltage: ~3.0V
- Ideal for indicators, status lights, and electronic projects
5mm DIP LED Yellow
1,00 EGP- Standard 5mm diameter LED
- Bright yellow light emission
- Low power consumption
- Easy to mount on breadboards or PCBs (DIP package)
- Typical forward voltage: ~2.1–2.2V
- Ideal for indicators, status signals, and DIY electronics projects
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
