5-Pin Relay Holder Case Base for Breadboard (Unassembled)
High RPM (~12000 at 5V) for dynamic mechanical tasks
Apple Shopping Event
30,00 EGP
Payment Methods:
Description
Description:
Our 5-Pin Relay Holder Case Base is specifically designed for use on a breadboard, making it easy to integrate relays into your prototyping projects. This base ensures a secure and stable connection for your relay, streamlining your circuit assembly process.
Package Includes:
- 2x 5-Pin Headers Male 2.54mm
- 1x 2-Pin Terminal Block
- 1x 3-Pin Terminal Block
- 1x 1N4007 Diode
Features:
- Breadboard Compatibility: The base is designed to fit seamlessly on standard breadboards.
- Easy Assembly: With included pin headers and terminal blocks, setting up your relay is quick and straightforward.
- Component Protection: The 1N4007 diode provides essential protection for your relay by preventing back EMF.
This product is perfect for electronics enthusiasts and professionals who need a reliable and efficient way to incorporate relays into their breadboard projects.
Note:
This item is shipped unassembled, allowing for customization and flexibility in your projects.
نظرة عامة ومواصفات المنتج — بالعربية
5-Pin Relay Holder Case Base for Breadboard (Unassembled) متوفر الآن في متجر إكوسترا للإلكترونيات، ضمن قسم Basic Electronic Components وRelays، بسعر 30,00 EGP. كود المنتج لدينا: EK1401. المنتج متوفر في المخزون وجاهز للشحن الفوري لكل محافظات مصر مع إمكانية الدفع عند الاستلام.
أهم المواصفات الفنية:
- Product Type: Relay Holder / Relay Base Adapter
- Pin Count: 5-Pin
- Compatibility: 5-Pin Relay (SPDT, typical)
- Use: Breadboard Mounting / Relay Breakout
- Assembly: Unassembled (DIY)
- طريقة التثبيت: Breadboard Plug-in (2.54 mm pitch)
- Terminal Type: Pin headers / PCB pads (kit dependent)
- الخامة: Plastic base + PCB (typical)
هذا المنتج مناسب لمشاريع الأردوينو (Arduino) و ESP32 و Raspberry Pi، ومشاريع الروبوتات وإنترنت الأشياء والتعليم الهندسي. جميع القطع مفحوصة قبل الشحن.
تصفّح المزيد من Basic Electronic Components في إكوسترا.
Specification
Specification
| WeightWeight | 15 g |
|---|---|
| Dimensions | 6 × 4 × 1 cm |
| Product Type | Relay Holder / Relay Base Adapter |
| Pin Count | 5-Pin |
| Compatibility | 5-Pin Relay (SPDT, typical) |
| Use | Breadboard Mounting / Relay Breakout |
| Assembly | Unassembled (DIY) |
| Mounting Type | Breadboard Plug-in (2.54 mm pitch) |
| Terminal Type | Pin headers / PCB pads (kit dependent) |
| Material | Plastic base + PCB (typical) |
| Input/Output Access | COM / NO / NC + Coil pins (typical) |
| Included (Typical) | Base/PCB, pin headers, screws/spacers (if applicable) |
| Not Included | Relay module/relay itself (typical) |
| Application | Prototyping, Arduino relay projects, testing |
