لوحات التطوير (Development Boards) لكل مستوى: Arduino (Uno و Mega و Nano)، ESP32 و ESP8266 للواي فاي والبلوتوث، Raspberry Pi و Pico، STM32، و Micro:bit. أساس أي مشروع تعلّم برمجة، إنترنت أشياء، روبوتات، أو أتمتة. متوفرة أصلية ومتوافقة بأسعار مناسبة.
Microcontroller and single-board development platforms across various architectures.
Development Boards
Arduino mega 2560 ATmega2560-16AU Board
1.500,00 EGP✅ 54 Digital I/O pins with 15 PWM
✅ 4 UARTs and 16 analog inputs
✅ 256 KB Flash, 8 KB SRAM, 4 KB EEPROM
✅ 100% Arduino IDE compatible
✅ Perfect for large-scale embedded projects
-17% 
-17% OFF
Arduino MEGA 2560 R3 with CH340 Chip
Original price was: 1.450,00 EGP.1.200,00 EGPCurrent price is: 1.200,00 EGP.- Programmer: CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by bootloader
Arduino Nano 3.0 Controller Board – FT232
290,00 EGP- Based on ATmega328 microcontroller
- FT232 USB-to-Serial driver for stable PC communication
- Compact and breadboard-friendly design
- 22 total I/O pins (14 Digital, 8 Analog)
- Supports serial, I2C, and SPI communication
- Onboard voltage regulator (5V & 3.3V)
- Preloaded with Arduino bootloader for easy programming
- Ideal for IoT, robotics, sensors, and embedded systems
Arduino Nano Type-C USB
250,00 EGP- Model Name/Number Arduino NANO
- Memory 32 KB of Which 2 KB Used By Bootloader
- Processor ATmega328
- USB 2.0 Ports Mini USB
- No. Of Cores Single
- Digital I/O Pin 22
- Weight 7g
Arduino Nano V3.0 CH340 Chip Board，Atmega328P
250,00 EGP- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Arduino Uno R3 with ch340
320,00 EGP- ATmega328 SMD microcontroller with Arduino bootloader
- Operating voltage: 5V; input 7-12V recommended
- 14 digital I/O pins (6 PWM), 6 analog inputs
- 32 KB Flash memory, 16 MHz clock speed
- CH340 USB-to-serial interface (driver may be needed)
- Fully compatible with Arduino IDE and libraries
- Includes USB cable for easy programming
Hot
Arduino Uno R3 Without Cable
440,00 EGP- ✅ ATmega328P microcontroller
✅ 14 digital and 6 analog I/O pins
✅ USB programming interface (USB cable sold separately)
✅ Compatible with Arduino IDE and shields
✅ Ideal for beginners and hobbyists
ATMEGA128 Arduino-Compatible Module with Bootloader (F128B)
480,00 EGP- 🧠 ATmega128 MCU with Arduino-compatible bootloader
- ⚡ 5V logic for easy interfacing with common modules
- 💾 Large memory: 128KB Flash for bigger projects
- 🧮 Extra SRAM & EEPROM for data-heavy applications
- 🔌 Multiple I/O pins for sensors, relays, and peripherals
- 🚌 Built-in UART / SPI / I2C(TWI) for flexible communication
- 🛠️ Easy programming via USB-to-Serial (bootloader upload)
- 📦 Ideal for robotics, automation, and advanced Arduino sketches
Cable For Arduino UNO/MEGA (USB A to B)-50 cm
25,00 EGP- 📏 Length: 20 cm
- 🖥️ Compatible with Arduino UNO, MEGA 2560 & USB Type B devices
- 🛡️ Foil & braid shielding for interference protection
- 🔗 Molded strain relief for added durability
- ⚡ USB 2.0 high-speed data transfer
- ✅ Plug & play with most OS
CD74HC4067 16-Channel Analog/Digital Multiplexer Breakout Board for Arduino
80,00 EGP- 🔀 CD74HC4067 16-channel analog/digital multiplexer breakout
- 🧩 Route 1 signal to 16 channels using 4 select pins (S0–S3)
- ⚡ Works with 3.3V & 5V logic—Arduino/ESP32 friendly
- 🎚️ Great for reading multiple analog sensors on one ADC pin
- 🔌 Can also switch digital GPIO signals between channels
- 🛠️ Enable pin (EN) for quick on/off control
- 🤖 Ideal for Arduino, STM32, Raspberry Pi, and IoT projects
- ✅ Perfect for keypads, pots, sensor arrays, and expansion
ESP32 30Pin Development Board (Wi-Fi Bluetooth) USB Micro
350,00 EGP- 📡 ESP32 30-pin development board with Wi-Fi + Bluetooth
- 🔌 Micro-USB for power and programming
- 🧩 30-pin header layout—easy breadboard/prototyping
- ⚡ Powerful dual-core MCU for IoT and automation projects
- 🚌 Supports GPIO / ADC / PWM / I2C / SPI / UART
- 🔋 Low-power modes for battery-based applications
- 🛠️ Compatible with Arduino IDE, ESP-IDF, and MicroPython
- ✅ Great for smart home, sensors, and wireless control
This category covers development boards beyond the classic Arduino lineup - platforms built around different microcontroller architectures, giving you more processing power, more peripherals, or a different toolchain depending on what your project needs.
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
