Microcontroller ICs
ATMEGA328P-AU SMD
150,00 EGP- 🧠 ATmega328P-AU microcontroller in SMD (TQFP) package
- ⚡ Popular MCU used in Arduino Uno/Nano-compatible designs
- 🧩 Ideal for custom PCBs, embedded projects, and prototyping
- 🚌 Supports UART / SPI / I2C(TWI) communication
- ⏱️ Runs up to 20MHz with external crystal support
- 💾 Built-in Flash + SRAM + EEPROM for program & data storage
- 🔌 Works with 3.3V or 5V systems (depending on clock setup)
- 🛠️ Programmable via ISP or bootloader (Arduino environment)
ATMEGA328P-U without bootLoader
220,00 EGP- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
ATMEGA32A-PU “8-bit AVR with 32K Bytes of ISP Flash”
260,00 EGP- 8-bit AVR microcontroller with 32KB ISP Flash
- 2KB SRAM and 1KB EEPROM memory
- Operates up to 16 MHz clock speed
- Rich peripherals: ADC, USART, SPI, I2C
- Low power consumption with multiple sleep modes
- 40-pin PDIP package for easy prototyping
PIC16F628A-I/P
100,00 EGP- 8-bit PIC microcontroller with 14-bit instruction set
- Flash memory: 2K words program storage
- RAM: 224 bytes | EEPROM: 128 bytes
- Operating speed: up to 20 MHz
- I/O pins: 16 (with individual direction control)
- Built-in peripherals: USART, CCP, timers, comparators
- Operating voltage: 2.0V – 5.5V
- Package: 18-pin DIP (I/P) for easy prototyping
- Low-power features with sleep mode
PIC16F877A-I/P
220,00 EGP-
8-bit Microchip PIC microcontroller with 14 KB Flash
-
368 Bytes RAM and 256 Bytes EEPROM
-
10-bit 8-channel ADC
-
USART, SPI, I2C communication interfaces
-
Up to 20 MHz clock speed
-
40-pin PDIP package suitable for prototyping
New
PICkit3 Debugger Programmer Emulator Controller Development Board
2.200,00 EGPPICkit3 debugger programmer with full-speed USB, 1.8-5V support, and real-time execution.
This category covers standalone microcontroller chips across various architectures, for projects moving from a development-board prototype to a custom-designed PCB, or for anyone building a microcontroller circuit entirely from scratch. See the AVR and PIC subcategories for those specific families' chips.
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
