Motors
12V DC 1/2″ Electric Solenoid Water Air Valve Switch (Normally Closed)
250,00 EGP- Rated Operating Voltage: 12V DC
- Rated Current: 1A
- Operation Mode: NC (Normally Closed)
- Pressure: 0.02 – 0.8MPa
- Max fluid temperature: 100°C
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
230,00 EGP- 🔁 16-channel PWM control (12-bit resolution)
- 🔌 I2C interface – only 2 pins needed
- 🧠 Chain up to 62 modules (992 outputs total)
- ⚙️ Adjustable PWM frequency (up to 1.6 kHz)
- ⚡ 3.3V and 5V logic compatible
- 🔧 Output enable pin for quick shutdown
- 🛡️ Reverse polarity protection
- 💡 Power indicator LED
- 🧩 Plug in up to 16 servos directly
1800KV Brushless Motor
475,00 EGP-
1800KV Rating for high-speed rotation and efficient performance
-
Outrunner Design ideal for drones, RC planes, and robotics
-
Lightweight & Compact for aerial and mobile applications
-
High Torque Output with low noise operation
-
Compatible with ESCs for smooth and precise speed control
2200KV Brushless DC Motor – High-Speed Powerhouse for RC & DIY Projects
450,00 EGP- 2200KV Rating – Ultra-fast 2200 RPM per volt for high-speed performance
- Brushless Outrunner Design – High torque, efficient, and low-maintenance
- Precision Build – Neodymium magnets, copper windings & ball bearings
- Efficient Cooling – Heat-dissipating open-frame or finned design
- Standard Mounting – Compatible with 3.5mm/4mm connectors or bare leads
- Wide Applications – Perfect for drones, RC planes, boats, and robotics
300 RPM 12V Dual Shaft DC Motor – Straight Drive
40,00 EGP- 300 RPM speed with good torque
- Operates on low voltage
- Lightweight plastic gear motor
- Absorbs shock and vibration
- Low friction & quiet operation
- Corrosion-resistant and low maintenance
370A Miniature Air Pump 3.7-12VDC 2.8W
200,00 EGP- 💨 370A miniature DC air pump for compact pneumatic projects
- ⚡ Wide voltage range: 3.7–12VDC
- 🔋 Power rating: 2.8W for efficient operation
- 📦 Small size—easy to fit inside tight enclosures
- 🧩 Ideal for inflators, air sampling, small suction systems
- 🛠️ Simple integration with tubes and basic wiring
- 🔁 Suitable for continuous running in DIY setups
- ✅ Great for Arduino/ESP32 automation and control projects
56mm 4-Blade Plastic Propeller (Blue)
25,00 EGP- 🔵 Blue plastic propeller with 4 blades
- 📏 Size: 56mm for compact airflow/thrust applications
- 🌀 4-blade design for smoother airflow and better push
- ⚙️ Compatible with small DC motors (with matching shaft)
- 💨 Ideal for mini fans, RC models, and DIY experiments
- 📦 Lightweight build for efficient rotation
- 🛠️ Easy to mount using suitable motor adapters
- ✅ Great for STEM, robotics, and prototyping projects
5x5mm Aluminum Rigid Coupling | Anodized Blue
45,00 EGP- 🔩 Aluminum rigid shaft coupling (5mm × 5mm)
- 🔵 Anodized blue finish—durable and corrosion resistant
- ⚙️ Connects two 5mm shafts for direct power transfer
- 🧱 Rigid design for strong, precise torque transmission
- 🛠️ Dual set-screws for secure, anti-slip mounting
- 📏 Helps maintain alignment in motion/control systems
- 🧩 Ideal for CNC, 3D printers, robotics, and automation
- ✅ Perfect for motor-to-shaft couplings in DIY builds
A4988 Stepper Motor Driver
75,00 EGP- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
Brushless Motor 1400KV
475,00 EGP- ⚙️ Brushless DC motor rated at 1400KV
- 🚀 1400KV = ~1400 RPM per volt (no-load)
- ⚡ High efficiency with strong power-to-weight performance
- 🧩 Ideal for RC planes, drones, boats, and DIY propulsion
- 🔌 Requires an ESC (electronic speed controller) to run
- 🎛️ Smooth speed control with standard PWM/servo signals
- 🛠️ Compatible with common prop adapters and mounts
- ✅ Great choice for high-performance RC and robotics projects
CNC Shield V3.0 For Arduino Uno
125,00 EGP- Four A4988 Drivers: Reliable stepper motor control with up to 2A per coil.
- Microstepping Support: Up to 16 microsteps for smooth and precise motion.
- Adjustable Current Limit: Fine-tune motor performance and protection.
- Heat Sink Compatible: Provisions for heat sinks to manage temperature.
- Arduino Compatibility: Works with Arduino Uno, Nano, and other boards.
- Clear Connections: Easily labeled for simple wiring and setup.
- GRBL Firmware Support: Compatible with popular CNC software.
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
