PCB DOT FR2 (9X15 cm2)
PCB DOT FR2 (9x15cm)
1. Material: FR2 (Phenolic Paper)
2. Dimensions: 9cm x 15cm
3. Layer Count: Single-Sided
4. Hole Pitch: 2.54mm
5. Mounting Holes: 4 Pre-drilled Corner Holes
Apple Shopping Event
28,00 EGP
Payment Methods:
Description
This PCB Dot FR2 board is a dot matrix prototyping perfboard made from FR2 phenolic paper/synthetic resin, giving a grid of isolated copper pads rather than connected tracks — each hole is its own independent solder point.
Measuring 9cm x 15cm (90mm x 150mm) with a thickness around 1.2mm–1.6mm, the board uses the standard 2.54mm hole pitch with 1.0mm hole diameter, matching common through-hole component spacing.
Four pre-drilled corner mounting holes allow the board to be secured in an enclosure, making it suited for point-to-point soldering, quick circuit prototyping, and STEM educational projects testing through-hole components.
Features:
- Dot matrix (isolated pad) layout
- Single-sided copper on FR2 substrate
- Board size: 9cm x 15cm
- Standard 2.54mm hole pitch
- 4 pre-drilled corner mounting holes
- Suited for point-to-point soldering and STEM projects
نظرة عامة ومواصفات المنتج — بالعربية
PCB DOT FR2 (9X15 cm2) متوفر الآن في متجر إكوسترا للإلكترونيات، ضمن قسم Breadboard and Zero PCBs، بسعر 28,00 EGP. كود المنتج لدينا: EK1459. المنتج غير متوفر حالياً — تواصل معنا عبر واتساب لمعرفة موعد توفره القادم.
أهم المواصفات الفنية:
- Product Type: Dot Matrix PCB / Prototyping Perfboard
- الخامة: FR2 (Phenolic Paper / Synthetic Resin)
- الأبعاد: 9cm x 15cm (90mm x 150mm)
- Board Thickness: ~1.2mm–1.6mm
- Layer Count: Single-Sided (Copper pads on one side)
- Hole Pitch: 2.54mm (0.1")
- Hole Diameter: 1.0mm
- Mounting Holes: 4 Pre-drilled corner mounting holes
هذا المنتج مناسب لمشاريع الأردوينو (Arduino) و ESP32 و Raspberry Pi، ومشاريع الروبوتات وإنترنت الأشياء والتعليم الهندسي. جميع القطع مفحوصة قبل الشحن.
تصفّح المزيد من Breadboard and Zero PCBs في إكوسترا.
Specification
Specification
| WeightWeight | 10 g |
|---|---|
| Dimensions | 5 × 4 × 2 cm |
| Product Type | Dot Matrix PCB / Prototyping Perfboard |
| Material | FR2 (Phenolic Paper / Synthetic Resin) |
| Dimensions | 9cm x 15cm (90mm x 150mm) |
| Board Thickness | ~1.2mm–1.6mm |
| Layer Count | Single-Sided (Copper pads on one side) |
| Hole Pitch | 2.54mm (0.1″) |
| Hole Diameter | 1.0mm |
| Mounting Holes | 4 Pre-drilled corner mounting holes |
