Shop
8-Channel Bi-Directional Logic Level Converter (1.8V–5V)
65,00 EGP- 8-channel logic level shifter
- 1.8V to 5V bi-directional conversion
- Ideal for MCU & sensor interfacing
- Easy to use and compact
8.000MHz Low Profile Crystal
4,00 EGP8.000MHz Low Profile Crystal
1. Frequency: 8.000MHz
2. Frequency Tolerance: ±30ppm (typical)
3. Load Capacitance: 20pF (typical)
4. Mode of Operation: Fundamental
5. Package Type: Low Profile HC-49
6. Operating Temperature: -40°C to +85°C
8.2k ohm 1/4 Watt
0,25 EGP✅ 8.2K ohm resistor
✅ 0.25 watt power rating
✅ Through-hole axial leaded package
✅ Suitable for low-power electronics
820 ohm 1/4 Watt
0,25 EGP- 🧰 Resistor set: 820Ω (1/4W) – 4 pieces
- ⚡ Power rating: 0.25W for general electronics circuits
- 💡 Ideal for LED current limiting and indicator circuits
- 🧩 Useful for pull-up/pull-down and signal biasing
- 🛠️ Through-hole resistors—easy breadboard and solder use
- 📦 Pack of 4 pieces—great for DIY builds and repairs
- 🔧 Common value for Arduino and prototyping projects
- ✅ Reliable resistors for everyday electronics work
82D05 12V Digital Power Channel Amplifier Bluetooth Speaker Module
45,00 EGP82D05 12V Digital Power Amplifier Module
1. Type: Class-D Digital Audio Amplifier
2. Voltage: 12V DC
3. Model: 82D05
4. Use: Speaker amplification for DIY audio builds
5. Common pairing: Bluetooth receiver modules for wireless speaker projects
82D05 5V Digital Power Channel Amplifier Bluetooth Speaker Module
50,00 EGP-
5V Power Supply for USB or battery-powered projects
-
Built-in Bluetooth Receiver for wireless audio streaming
-
Stereo Output with left and right channel terminals
-
Compact Size ideal for DIY speakers and audio projects
-
Low Power Consumption with efficient digital amplification
82k ohm 1/4 Watt
0,25 EGP82k ohm 1/4 Watt Resistor (4pcs)
1. Resistance: 82 kΩ
2. Power Rating: 0.25 W
3. Package: Through-hole axial
4. Quantity: 4 per pack
9V 10cm Battery Connector
5,00 EGP- Hard leather construction with fine workmanship
- Red and black wires to prevent polarity mistakes
- 10 cm cable length for flexible connections
- Prevents short circuits and ensures reliable power delivery
- Snap-on connector for quick battery attachment/detachment
A4 PCB PAPER
7,00 EGPA4 PCB Paper
1. Sheet Size: A4 (210mm x 297mm)
2. Printing Compatibility: Laser Printer / Photocopier Only
3. Working Principle: Heat-Activated Toner Transfer
4. Application: PCB Prototyping / DIY Circuit Board Etching
A4988 Stepper Motor Driver
75,00 EGP- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
AC/DC Power Adapter (5V 1A)
50,00 EGP- Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz.
- Input current (mA): 100.
- Output Power: 5V 1A.
- Input Plug: 2-Pin EU type.
- Output Plug: 5.5mm DC plug.
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
