Shop
Battery 9v Veko
45,00 EGP- 🔋 Veko 9V battery for everyday electronics
- ⚡ Stable power for low-to-medium drain devices
- 🧠 Ideal for smoke alarms, remotes, toys, and multimeters
- 🔌 Standard 9V snap terminals for quick connection
- ⏳ Good shelf life for standby devices
- 📦 Compact rectangular design—easy to carry and store
- 🛡️ Reliable performance with leak-resistant build
- ✅ Easy replacement for standard 9V battery applications
Battery Charger for 18650 Li-ion 1 Cell YH-07
50,00 EGP-
Designed for 1×18650 Li-ion battery (3.7V)
-
Compact and portable charging dock
-
LED indicators: Red (charging), Green (fully charged)
-
Built-in protection: overcharge, short-circuit, reverse polarity
-
USB-powered – compatible with wall adapters, laptops, power banks
-
Ideal for flashlights, DIY projects, and battery testing
Battery Holder ( 1 x 18650 ) (3.7v)
12,00 EGP- 🔹 Holds 1 x 18650 battery (3.7V)
- 🔧 Pre-soldered leads for easy connection
- 🧱 Made of high-quality plastic
- 🛠️ Easy to install and use
- ⚠️ Compatible with standard 18650 batteries (not included)
Battery Holder ( 2 x 18650 ) (3.7v)
20,00 EGP- Hold 2 standard 18650 batteries.
- Wire Length: 15 cm.
- Output: 7.2v.
- Dimension (Appro.) : 76 x 40 x 20 mm
- Weight: 12gm
- High-quality plastic material
Battery Holder ( 3 x 18650 ) (3.7v)
25,00 EGP- Hold 3 standard 18650 batteries.
- Wire Length: 15 cm.
- Output: 11.1 V.
- Dimension (Appro.) : 76 x 60 x 18 mm.
- Weight: 18 gm.
- High-quality plastic material
Battery Holder ( 4 x 18650 ) (3.7v)
30,00 EGP- 🔋 Battery holder for 4× 18650 Li-ion cells (3.7V each)
- 🧩 Securely holds four cells for DIY battery pack builds
- 🔌 Easy wiring terminals/leads for quick connection
- 🛠️ Ideal for power banks, robots, LED projects, and portable power
- 📦 Durable plastic body keeps batteries stable and protected
- ⚡ Supports series/parallel configurations (depends on holder wiring)
- 🛡️ Use with a proper BMS/charger for Li-ion safety
- ✅ Great for prototyping rechargeable power systems
Battery Holder for CR2025/CR2032 PCB Mount
6,00 EGP-
Compatible with CR2025 & CR2032 coin cell batteries
-
PCB Mountable for secure and stable installation
-
Metal Contacts provide reliable electrical connection
-
Compact Design suitable for slim electronic devices
-
Durable Plastic Housing ensures long-lasting performance
Battery Holder for CR2450 PCB Mount
8,00 EGP-
Fits CR2450 Coin Cell (3V lithium battery)
-
PCB Mount Design for stable soldering
-
Secure Metal Contacts ensure reliable power connection
-
Compact & Low-Profile ideal for embedded and wearable projects
-
Durable Plastic Body for long-term use
Battery Kit Breadboard (9V Input – Output 5V)
35,00 EGP- 9V input with regulated 5V output
- Breadboard-compatible design
- Plug-and-play for fast prototyping
- Ideal for Arduino, sensors, and logic circuits
- Includes 9V battery clip
BB-J65 Connecting Jumper Wires for Breadboard
50,00 EGP- Pre-cut and pre-stripped for quick use
- Multiple wire lengths for flexibility
- Solid core for secure breadboard connection
- Color-coded for easy identification
- Reusable and durable design
- Compatible with 2.54mm pitch headers
- Ideal for prototyping and DIY electronics
BC547 NPN Transistor – DIP Package
1,00 EGP- NPN transistor in DIP package
- Max collector current: 100 mA
- Max collector-emitter voltage: 45 V
- High gain (hFE up to 800)
- Low noise for audio and signal applications
- Common for general-purpose amplification and switching
BC557 PNP General Purpose Transistor
1,00 EGP-
PNP transistor for general-purpose switching and amplification
-
-45V / -100mA ratings make it suitable for low-power circuits
-
TO-92 package for easy through-hole mounting
-
Widely used in audio, analog, and control applications
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
