Shop
Flex Sensor 5.6 cm (Detect Bending Motion)
750,00 EGP-
5.6 cm length flexible sensor
-
Resistance varies with bending angle (approx. 10 kΩ flat)
-
Easy to interface with microcontrollers
-
Durable and responsive to motion
-
Ideal for motion and gesture detection
Flexible USB LED Light (5V, 1.2W)
20,00 EGP- Powered by 5V USB – plug-and-play with any USB port
- 1.2W Power Consumption – energy-efficient lighting
- Flexible Gooseneck Design – easy angle adjustment
- Bright LED Illumination – ideal for laptops, reading, or workspaces
- Compact & Portable – great for travel or everyday use
Flux JYD Soldering Paste 150G
30,00 EGP- Strong, clean, and reliable solder joints
- Neutral pH (7 ± 0.3), non-corrosive and safe
- Low-residue formula – no cleaning needed
- Excellent insulation and heat transfer
- Long shelf life – won’t dry out easily
- Ideal for electronics, PCB repair, and fine-pitch soldering
Frequency Adjustable Pulse Generator Module NE555
35,00 EGP- Input Voltage: 5V-15VDC
- Output amplitude: 4.2V V-PP to 11.4V V-PP.
- Output Current : 15mA for 5V & 35mA for 12V.
- Color: Blue
- Working voltage: 5-12V
- Size: 25x 13 x 12 mm (LxWxH)
- Minimum – 50% duty cycle, 3.7 Hz & Maximum – 98% duty cycle, 1.3KHz
FSR402 Round Force Sensor
520,00 EGP-
Force-sensitive resistor – resistance decreases with applied pressure
-
12.7mm round sensing area for compact integration
-
Thin and flexible – fits easily into tight or curved spaces
-
Compatible with analog input on Arduino, Raspberry Pi, ESP32, etc.
-
Detects touch, weight, and pressure from ~0.2N to 20N
-
Fast response time – <1 millisecond activation
FTDI FT232RL USB to TTL Converter Module
155,00 EGP-
Based on reliable FTDI FT232RL chipset
-
Converts USB to 3.3V or 5V TTL serial signals
-
Selectable VCC output (3.3V / 5V) via jumper or solder pads
-
Standard 6-pin interface: DTR, RX, TX, VCC, CTS, GND
-
Supports auto-reset for Arduino boards (via DTR)
-
High-speed data rate up to 3 Mbps
-
Compatible with Windows, macOS, and Linux
-
Integrated USB Type-A / Mini / Micro USB (varies by version)
-
Compact and easy-to-use design
FunDuino UNO (ATMega 328P board compatible with Arduino Uno) (Arduino Compatible)
650,00 EGP-
ATmega328P Microcontroller fully compatible with Arduino UNO
-
USB Interface (CH340 or FTDI) for easy PC connection
-
14 Digital I/O Pins, 6 Analog Inputs, PWM support
-
Standard Arduino UNO Form Factor for shield compatibility
-
Ideal for Beginners, Prototyping, and Educational Use
Fuse Holder ( External for T5x20 Size)
10,00 EGP- Houses standard 5×20mm glass fuses – supports fast, reliable fuse replacement
- Inline/external design – ideal for DC circuits, automotive, and DIY builds
- Secure screw-lock cap – keeps fuse firmly in place during operation
- Durable plastic body – offers excellent insulation and protection
- Supports up to 10A / 250V – check fuse rating for exact limits
- Easy wiring – solder or crimp terminals for custom installations
General Purpose Relay SPDT (1 Form C) 12VDC Coil 10A Through Hole 5 Pin
15,00 EGP- Type: SPDT (Single Pole Double Throw) / 1 Form C.
- Coil Voltage: 12V DC.
- Contact Rating: 10A @ 250VAC or 30VDC.
- Pins: 5-pin through-hole for PCB mounting.
- Compact Design: ~28 x 12.5 x 15 mm size.
- Fast Response: ≤10 ms operation, ≤5 ms release time.
- Durable: High insulation resistance and reliable performance.
- Versatile Use: Ideal for automotive, industrial, and home automation.
General Purpose Relay SPDT (1 Form C) 24VDC Coil 10A Through Hole 5 Pin
15,00 EGP- 🔁 SPDT relay (1 Form C): NO/NC changeover contact
- ⚡ 24VDC coil for industrial/control circuits
- 💪 High switching capacity: up to 10A
- 🔌 5-pin through-hole package for easy PCB mounting
- 🧩 Ideal for Arduino/PLC control with driver transistor
- 🏠 Switches loads like lamps, motors, solenoids, and pumps
- 🛡️ Provides electrical isolation between control & load
- ✅ Reliable general-purpose relay for automation projects
General Purpose Relay SPDT (1 Form C) 5VDC Coil 10A Through Hole 5 Pin
12,00 EGP-
SPDT (Single Pole Double Throw) configuration – 1 Form C
-
5V DC coil – compatible with Arduino, ESP32, Raspberry Pi
-
Handles up to 10A current for AC/DC loads
-
5-pin through-hole design – easy for PCB integration
-
Compact, sealed plastic housing for durability
-
Suitable for switching lights, motors, fans, and more
-
Reliable, low-resistance contacts for consistent operation
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
