Shop
New
3.3V/5V MB102 Breadboard Power Supply Module
50,00 EGPMB102 breadboard power supply module with switchable 3.3V/5V output.
3.7V 220mAh LiPo Rechargeable Battery (402030) with Pre-Soldered Wires
75,00 EGP- 🔋 3.7V LiPo rechargeable battery (402030)
- ⚡ Capacity: 220mAh for small portable devices
- 📦 Compact size—ideal for tight enclosures
- 🔌 Pre-soldered wires for quick, easy connection
- 🧩 Great for wearables, IoT nodes, and small RC projects
- 🔁 Rechargeable—use with a proper LiPo charger module
- 🛡️ Handle with care: avoid over-charge/over-discharge
- ✅ Perfect lightweight power source for DIY electronics
300 RPM 12V Dual Shaft DC Motor – Straight Drive
40,00 EGP- 300 RPM speed with good torque
- Operates on low voltage
- Lightweight plastic gear motor
- Absorbs shock and vibration
- Low friction & quiet operation
- Corrosion-resistant and low maintenance
30A range Current Sensor Module ACS712
100,00 EGP30A range Current Sensor Module ACS712
1. Current Range: 30A AC/DC
2. Type: Hall-effect based linear sensor
3. Sensitivity: 185 mV/A
4. Output: Analog voltage proportional to current
5. Features: Electrical isolation, low offset
330 ohm 1/2 Watt
0,25 EGP✅ 330 ohm resistance
✅ 0.5 watt power dissipation
✅ Through-hole axial package
✅ Widely used in LED and general circuits
33k ohm 1/4 Watt
0,25 EGP33k ohm 1/4 Watt Resistor (4pcs)
1. Resistance: 33 kΩ
2. Power Rating: 0.25 W
3. Package: Through-hole axial
4. Quantity: 4 per pack
33pF 50V Ceramic Capacitors
1,00 EGP- Capacitance: 33pF (picofarads), ideal for high-frequency applications.
- Voltage Rating: 50V, suitable for low-voltage circuits.
- Material: Made from high-quality ceramic for reliability and stability.
- Compact: Small size perfect for tight spaces in electronic circuits.
- Versatile: Commonly used in RF (radio frequency) circuits, oscillators, and filtering applications in electronics, audio systems, and signal processing.
366D Desoldering Pump – Soft Handel – Solder Sucker
95,00 EGP- Strong suction for efficient solder removal
- Ergonomic non-slip handle for comfort
- Easy one-hand operation
- Heat-resistant replaceable nozzle
- Lightweight and portable design
- Durable construction for long-term use
- Ideal for PCB repair and DIY electronics
370A Miniature Air Pump 3.7-12VDC 2.8W
200,00 EGP- 💨 370A miniature DC air pump for compact pneumatic projects
- ⚡ Wide voltage range: 3.7–12VDC
- 🔋 Power rating: 2.8W for efficient operation
- 📦 Small size—easy to fit inside tight enclosures
- 🧩 Ideal for inflators, air sampling, small suction systems
- 🛠️ Simple integration with tubes and basic wiring
- 🔁 Suitable for continuous running in DIY setups
- ✅ Great for Arduino/ESP32 automation and control projects
390 ohm 1/4 Watt
0,25 EGP- 🧰 Resistor set: 390Ω (1/4W) – 4 pieces
- ⚡ Power rating: 0.25W for general-purpose circuits
- 💡 Ideal for LED current limiting and indicator projects
- 🧩 Useful for pull-up/pull-down and biasing circuits
- 🛠️ Through-hole resistors—easy to breadboard and solder
- 📦 Pack of 4 pieces—handy for DIY builds and repairs
- 🔧 Common value for Arduino and electronics prototyping
- ✅ Reliable resistors for everyday use
3D Printing the Robot Arm
2.000,00 EGP- 5 Degrees of Freedom (DOF)
- Includes 3x MG996R high-torque servos
- Includes 3x SG90 micro servos
- Durable and lightweight 3D printed structure
- Compatible with Arduino, ESP32, Raspberry Pi
- Easy to assemble and customize
- Ideal for pick-and-place and educational projects
3S 20A 12V 18650 Lithium Battery Charger Board Protection Module BMS
65,00 EGP- 3S 12V Configuration: Designed for 3-series 18650 lithium batteries (10.8V–12.6V system).
- 20A Discharge Current: Supports high current output, suitable for power tools and e-bikes.
- Built-in BMS Protection: Includes overcharge, over-discharge, overcurrent, and short circuit protection.
- Compact Design: Lightweight and easy to integrate into custom battery packs.
- Efficient Charging Management: Ensures safe and balanced charging across all cells.
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
