IoT and Wireless

2.4GHz SMA to IPEX Folded Antenna – 2.5dBi WiFi Bluetooth ZigBee

150,00 EGP
  • 2.4GHz Frequency Band
  • 2.5dBi Signal Gain
  • SMA to IPEX (U.FL) Connector
  • Supports WiFi, Bluetooth & ZigBee
  • Foldable Antenna Design
  • Stable & Reliable Performance
  • Ideal for IoT & Wireless Devices

2.4GHz Wireless Transceiver nRF 24L01 (85 meter)

65,00 EGP

✅ Frequency: 2.4GHz ISM Band (Worldwide Compatibility)
✅ Range: Up to 85 meters (open space, with external antenna)
✅ Data Rate: 250kbps, 1Mbps, or 2Mbps (adjustable)
✅ Low Power Consumption: Suitable for battery-operated devices
✅ SPI Interface: Easy integration with microcontrollers
✅ 6 Data Pipes: Enables multiple communication channels
✅ Compact Size: Lightweight and easy to embed in projects
✅ Supply Voltage: 1.9V to 3.6V (3.3V recommended)
✅ ShockBurst™ Technology: Automatic packet handling for efficient transmission

433MHz HC-12 Wireless Serial Port Module (1000m Range)

275,00 EGP
  • Compact, low-power 433MHz RF transceiver.
  • Transparent TTL UART (serial) interface — plug & play.
  • Long range: up to 1000 m line-of-sight (with suitable antenna).
  • Configurable via AT commands (baud rate, channel, power, mode).
  • Wide operating voltage for direct microcontroller connection.
  • Low standby/operating current — suitable for battery systems.
  • Reliable data link for telemetry, remote control, and sensor networks.

Adapter Board for NRF24L01 Wireless Module 3.3V

40,00 EGP
  • Stable 3.3V output for NRF24L01 modules
  • Reduces noise for reliable wireless communication
  • Built-in voltage regulator and filtering capacitors
  • Easy plug-and-play connection
  • Protects module from voltage fluctuations
  • Compatible with Arduino and microcontrollers
  • Compact and lightweight design

ESP-01S 5V WiFi Relay Module for Smart Home Control

65,00 EGP
  • ESP8266 wifi module onboard; in AP mode, it can connect to 5 clients simultaneously.
  • Operating Method: Using an APP, a cellphone connected to a wifi module on the same router may operate the relay.
  • Diode effusion protection.
  • Short response time

ESP32 38Pin MICRO

420,00 EGP

2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applications

ESP32 Development Board CH9102X WiFi+Bluetooth - Ekostra Electronics In Egypt اكوسترا الكترونيكس
-13%

-13% OFF

ESP32 Development Board CH9102X WiFi+Bluetooth

Original price was: 400,00 EGP.Current price is: 350,00 EGP.
  1. Ultra-low-power management.
  2. 4 MB Flash.
  3. Current: 80 mA.
  4. Supply Voltage: 3.0 V ~ 3.6 V.
  5. Data Rate: 150 Mbps.
  6. Frequency: 2.4 GHz.

ESP32 Type-C 30Pin Development Board (Wi-Fi Bluetooth)

400,00 EGP
  • Dual-core 32-bit processor (up to 240 MHz)
  • Integrated Wi-Fi (2.4 GHz) & Bluetooth (v4.2 BLE)
  • USB Type-C interface for power & programming
  • 30 GPIO pins with multiple peripheral functions
  • Supports Arduino IDE, MicroPython, ESP-IDF
  • 4 MB Flash memory for large applications
  • On-board voltage regulator (5 V → 3.3 V)
  • Compact design with reset and boot buttons

ESP32-DEVKITC-32D

450,00 EGP

ESP32-DevKitC Core Board (38-Pin)
1. SoC: ESP32 (WiFi + Bluetooth)
2. GPIO Pins: 38
3. Connector: USB Type-C
4. Material: ABS + Metal
5. Color: Purple

ESP8266 NodeMCU CP2102 Board

Original price was: 275,00 EGP.Current price is: 220,00 EGP.
  • ESP8266 Wi-Fi microcontroller with 4MB flash
  • Built-in CP2102 USB-to-serial converter
  • Supports Arduino IDE and Lua scripting
  • 3.3V logic with onboard voltage regulator
  • Multiple GPIO pins with PWM, I2C, SPI
  • Compact and easy to program via USB

ESP8266 NodeMcu V2.1 CH9102X

195,00 EGP

ESP8266 NodeMcu V2.1 CH9102X Development Board
1. CPU: ESP8266
2. USB Chip: CH9102X
3. Flash: 4 MB
4. WiFi: 802.11 b/g/n
5. Power: via micro-USB
6. Pin Header: 2.54mm

GSM/GPRS/3G PCB Antenna with IPEX Connector (15cm, 3dBi) for SIM800/Sim908/Sim900 (1520)

40,00 EGP
  1. Name: 2G 3G IPEX antenna
  2. Connector type: ipx13
  3. Gain definition: 3dBi (Typical)
  4. Frequency band definition: 17102170MHz 800960
  5. Impedance definition: 50 ohm
  6. Total length: as shown in Figure
  7. Impedance 50 Ohm

Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies

Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.