Sensors
Speed Measuring Sensor Groove Coupler Module For Arduino
60,00 EGP- ⏱️ Speed measuring sensor groove coupler module for Arduino
- 🔦 IR slot (photo-interrupter) sensor for pulse counting
- ⚙️ Measures RPM using encoder disks/wheels through the slot
- 📈 Digital output—easy to read with MCU interrupt pins
- 🧩 Ideal for motor speed feedback and robotics projects
- ⚡ Works with 3.3V/5V systems (module dependent)
- 🛠️ Simple wiring: VCC, GND, OUT
- ✅ Perfect for tachometer and encoder-based measurements
TCRT 5000 Single Channel Line Tracking Sensor Module
40,00 EGPTCRT 5000 Single Channel Line Tracking Sensor Module
1. Sensing Type: Reflective infrared
2. Optimal Sensing Distance: 3mm
3. Supply Current: 15mA
4. Operating Voltage: 3.5V–5V
5. Sensitivity: Adjustable via potentiometer
TCRT5000L 5 Channel Tracking Sensor Tracking Module Infrared Sensor
180,00 EGP- 🧭 TCRT5000L 5-channel infrared tracking sensor module
- 🔦 5 IR reflective sensors for accurate line tracking
- 📏 Great for detecting black/white lines and edges
- ⚡ Works with 3.3V/5V controllers (module dependent)
- 🎛️ Adjustable sensitivity via onboard potentiometers (common design)
- 🤖 Ideal for line follower robots and smart car projects
- 🛠️ Easy interface with digital outputs to Arduino/MCU pins
- ✅ Perfect for robotics competitions and DIY tracking builds
TCS230 Color Recognition Sensor Module
470,00 EGP- Uses TCS3200 color light-to-frequency IC
- Outputs square wave proportional to light intensity
- High-resolution color detection with programmable filters
- 50% duty cycle, frequency-based output
- Compatible with Arduino, Raspberry Pi, and microcontrollers
- Supports power-down mode for energy saving
- Compact module, easy to integrate in color recognition projects
- Variant: GY-31 or HW-531 (shipped randomly)
TCS3200 Color Sensor Module
400,00 EGP-
Based on TCS3200 color light-to-frequency converter IC
-
Converts light intensity into a square wave signal
-
Supports programmable color detection (RGB + clear)
-
Directly compatible with Arduino, Raspberry Pi, and microcontrollers
-
Offers high-resolution and stable output
-
Includes power-down mode for energy efficiency
-
Built-in photodiodes with selectable filters
⚠️ Note: Shipped as either GY-31 or HW-531 (same functionality)
TDS Sensor V1.0 Water Quality Meter Module – Arduino Compatible, Liquid Total Dissolved Solids Measurement
500,00 EGP- Measures Total Dissolved Solids (TDS) in water
- Analog Output compatible with Arduino UNO and other boards
- Detects Water Purity for aquariums, hydroponics, and filtration systems
- Wide Voltage Range (3.3V–5V) for flexible use
- Easy-to-Use Probe with waterproof connector for reliable readings
TOF0200C Laser Distance Sensor Module – 200cm I2C
320,00 EGP-
ToF laser distance measurement up to 200 cm
-
High accuracy with fast response
-
I2C interface for easy integration
-
Low power, compact and lightweight
-
Compatible with Arduino, Raspberry Pi, and ESP32
Triple Axis Accelerometer Module (ADXL 345)
320,00 EGP-
3-Axis Acceleration Detection (X, Y, Z axes)
-
High Resolution (13-bit) with ±2g to ±16g range
-
I2C and SPI Interfaces for easy microcontroller integration
-
Low Power Consumption ideal for portable devices
-
Used in Motion Sensing, Tilt Detection, and Robotics
Ultrasonic holder
25,00 EGP- 🛠️ Designed for HC-SR04 ultrasonic sensor
- 🧱 Made from ABS or acrylic (variant dependent)
- 🔩 Pre-drilled for easy chassis mounting
- 🪶 Lightweight and ideal for mobile robots
- 🔄 Some versions allow angle adjustment
Vertical Water Level Sensor Float Switch
100,00 EGP- 💧 Vertical float switch for water level detection
- 🔁 Simple ON/OFF output—acts like a basic switch
- 🧲 Magnetic reed switch inside for reliable triggering
- 🛠️ Easy tank mounting with vertical installation
- 🚰 Ideal for water tanks, sump pumps, and overflow protection
- 🔌 Works with Arduino/PLC using pull-up or pull-down wiring
- 🛡️ Corrosion-resistant design for long-term use
- ✅ Great for automatic filling/draining control systems
VL53L0X Purple Laser Distance Sensor Module
275,00 EGPProduct Highlights
- Time-of-Flight (ToF) Tech: Measures distance by timing light travel for superior accuracy regardless of object color.
- Long Range Detection: Precise absolute range measurements from 3cm up to 2 meters (2000mm).
- Class 1 Laser Safety: Utilizes a 940nm invisible laser that is safe for the human eye.
- Universal Compatibility: Integrated level shifters allow for direct use with 3.3V and 5V microcontrollers.
- High-Speed Mode: Fast ranging capabilities (up to 50Hz) perfect for high-speed robotics and drones.
Voltage Detection Sensor Module 25V
40,00 EGP-
Measures DC voltages up to 25V
-
Provides 0–5V analog output for ADC input
-
Built-in 5:1 voltage divider circuit
-
3-pin interface: VCC, GND, OUT
-
Compact module with mounting holes
-
Compatible with Arduino, ESP32, Raspberry Pi, and more
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
