Sensors
12mm 12528 LDR，10-20K
15,00 EGP✅ 12mm CdS photoresistor
✅ 10k–20k Ω resistance in dark
✅ Sensitive to visible light (peak ~520 nm)
✅ Fast response time (~10 ms)
✅ Ideal for light sensing and automation
20A range Current Sensor Module ACS712
100,00 EGP20A range Current Sensor Module ACS712
1. Current Range: 20A AC/DC
2. Type: Hall-effect based linear sensor
3. Sensitivity: 100 mV/A
4. Output: Analog voltage proportional to current
5. Features: Electrical isolation, low offset
3 Channel Path Tracing Module
150,00 EGP3-channel IR line tracking module with adjustable sensitivity for robot path detection.
30A range Current Sensor Module ACS712
100,00 EGP30A range Current Sensor Module ACS712
1. Current Range: 30A AC/DC
2. Type: Hall-effect based linear sensor
3. Sensitivity: 185 mV/A
4. Output: Analog voltage proportional to current
5. Features: Electrical isolation, low offset
4 Channel Infrared Tracking Module
160,00 EGP- Working voltage (V): 3.3 ~ 5
- Working current (A): Above 1A
- Operating Temperature (℃): -10 ~ +50
- Mounting hole: M3
- Detection range: 1mm ~ 60 cm adjustable.
-13% OFF
4-Pin Light-Dependent Photosensitive Sensor LDR Module
Original price was: 40,00 EGP.35,00 EGPCurrent price is: 35,00 EGP.4-pin LDR photosensitive sensor module with adjustable light detection sensitivity.
4PIN IR Infrared Flame Detection Sensor Module
35,00 EGPIR flame detection sensor module with adjustable sensitivity for Arduino and Raspberry Pi.
5-Channel Flame Sensor Module
150,00 EGP- Detecting range: >120 degree
- Analog and digital outputs
- On-board potentiometer and indicators
- 1% resistors to make this module more reliable and precise
- Operating Voltage: 3.3V – 9V
- Board Diameter: 40 mm.
5A range Current Sensor Module ACS712
100,00 EGP- ⚡ ACS712 current sensor module (5A range)
- 🔁 Measures AC/DC current with Hall-effect sensing
- 📈 Analog voltage output proportional to current
- 🧩 Ideal for Arduino/MCU current monitoring and protection
- 🛡️ Electrical isolation between load and measurement circuit
- ⚡ Low resistance conduction path for minimal power loss
- 🛠️ Easy wiring: VCC, GND, OUT + IP+/IP- terminals
- ✅ Great for power supplies, motors, and battery monitoring
AHT10 High Precision Digital Temperature And Humidity Measurement Module
180,00 EGP- Interface type: I2C
- Working voltage: 1.8 – 6.0 V
- Interface size: 4*2.54mm pitch
- Humidity accuracy: typical ± 2%
- Humidity resolution: 0.024%
- Temperature accuracy: typical ± 0.3 ° C
Analog PH Sensor Kit
1.800,00 EGP- Module power supply: 5 VDC.
- Measuring temperature: 0-50 ℃.
- Response time: ≤ 1min.
- pH sensor with BNC connector.
- Gain adjustment Potentiometer.
- Power indicator LED.
AS5600 Magnetic Encoder Module (12-bit Precision)
250,00 EGP- 🧲 AS5600 magnetic rotary encoder module (12-bit)
- 🎯 High resolution: 4096 steps per revolution
- 🔁 Contactless sensing for long life and smooth tracking
- 🚌 I2C interface for easy microcontroller connection
- 📈 Provides angle, speed, and position feedback
- 🧩 Ideal for knobs, robots, gimbals, and motor control
- ⚡ Low power—great for battery-powered projects
- ✅ Works with Arduino, ESP32, STM32, Raspberry Pi
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
