AHT10 High Precision Digital Temperature And Humidity Measurement Module - Ekostra Electronics In Egypt اكوسترا الكترونيكس

AHT10 High Precision Digital Temperature And Humidity Measurement Module

  1. Interface type: I2C
  2. Working voltage: 1.8 – 6.0 V
  3. Interface size: 4*2.54mm pitch
  4. Humidity accuracy: typical ± 2%
  5. Humidity resolution: 0.024%
  6. Temperature accuracy: typical ± 0.3 ° C
SKU: EK1373 Categories: , Tags: ,

Apple Shopping Event

Hurry and get discounts on all Apple devices up to 20%

180,00 EGP

Compare
6 People watching this product now!

Payment Methods:

Description

The AHT10 High Precision Digital Temperature And Humidity Measurement Module is a new generation of temperature and humidity sensors, sets a new standard in size and intelligence: it is embedded in a dual-row flat leadless SMD package for reflow soldering with a 4 x 5mm bottom and a height of 1.6mm. The sensor outputs a calibrated digital signal in standard I 2C format.
 
The AHT10 is equipped with a newly designed ASIC-specific chip, an improved MEMS semiconductor capacitive humidity sensing element and a standard on-chip temperature sensing element. Its performance has been greatly improved beyond the reliability level of previous generation sensors. The first generation of temperature and humidity sensors have been improved to make them more stable in harsh environments.
 
This sensor gives a calibrated digital signal outputs in standard I2C format. The AHT10 is equipped with a newly designed ASIC-specific chip, an improved MEMS semiconductor capacitive humidity sensing element and a standard on-chip temperature sensing element. Its performance has been greatly improved beyond the reliability level of previous generation sensors
 

Specifications and Features:

  1. Interface type: I2C
  2. Working voltage: 1.8 – 6.0 V
  3. Interface size: 4*2.54mm pitch
  4. Humidity accuracy: typical ± 2%
  5. Humidity resolution: 0.024%
  6. Temperature accuracy: typical ± 0.3 ° C
  7. Temperature resolution: Typical 0.01 °C
  8. Working temperature: -40°C–85°C

Package Includes:

1 x Digital Temperature and Humidity Sensor

🔌
Pin Connections
1 Table
Pin Connections Table 1
BoardSensor PinConnection
AHT10VCC/GND/SDA/SCL3.3-5V / GND / board SDA / board SCL
📟
AHT10 High Precision Digital Temperature And Humidity Measurement Module
7 Examples • C/C++ | Boards: Arduino Uno, Arduino Nano, Arduino Mega, ESP32, ESP8266, STM32, Raspberry Pi Pico
AHT10 High Precision Digital Temperature And Humidity Measurement Module - Arduino Uno
AHT10 High Precision Digital Temperature And Humidity Measurement Module - Arduino Nano
AHT10 High Precision Digital Temperature And Humidity Measurement Module - Arduino Mega
AHT10 High Precision Digital Temperature And Humidity Measurement Module - ESP32
AHT10 High Precision Digital Temperature And Humidity Measurement Module - ESP8266
AHT10 High Precision Digital Temperature And Humidity Measurement Module - STM32
AHT10 High Precision Digital Temperature And Humidity Measurement Module - Raspberry Pi Pico
📄 File: aht10_high_precision_digital_temperature_and_humidity_measurement_module_-_arduino_uno.inoArduino Uno
724 characters
1//ekostra.com
2//electronics store in egypt
3//+201008896258
4
5// I2C wiring for Arduino Uno: A4=SDA, A5=SCL. VCC->3.3V or 5V per module label, GND->GND.
6#include <Wire.h>
7#include <Adafruit_AHTX0.h> // works for AHT10/AHT20/AHT25 - same driver family
8
9Adafruit_AHTX0 aht;
10
11void setup() {
12 Serial.begin(115200);
13 Wire.begin();
14 if (!aht.begin()) {
15 Serial.println("AHT sensor not found - check wiring!");
16 while (1) delay(10);
17 }
18}
19
20void loop() {
21 sensors_event_t humidity, temp;
22 aht.getEvent(&humidity, &temp);
23
24 Serial.print("Temperature: "); Serial.print(temp.temperature); Serial.print(" C ");
25 Serial.print("Humidity: "); Serial.print(humidity.relative_humidity); Serial.println(" %");
26
27 delay(1000);
28}
📄 File: aht10_high_precision_digital_temperature_and_humidity_measurement_module_-_arduino_nano.inoArduino Nano
725 characters
1//ekostra.com
2//electronics store in egypt
3//+201008896258
4
5// I2C wiring for Arduino Nano: A4=SDA, A5=SCL. VCC->3.3V or 5V per module label, GND->GND.
6#include <Wire.h>
7#include <Adafruit_AHTX0.h> // works for AHT10/AHT20/AHT25 - same driver family
8
9Adafruit_AHTX0 aht;
10
11void setup() {
12 Serial.begin(115200);
13 Wire.begin();
14 if (!aht.begin()) {
15 Serial.println("AHT sensor not found - check wiring!");
16 while (1) delay(10);
17 }
18}
19
20void loop() {
21 sensors_event_t humidity, temp;
22 aht.getEvent(&humidity, &temp);
23
24 Serial.print("Temperature: "); Serial.print(temp.temperature); Serial.print(" C ");
25 Serial.print("Humidity: "); Serial.print(humidity.relative_humidity); Serial.println(" %");
26
27 delay(1000);
28}
📄 File: aht10_high_precision_digital_temperature_and_humidity_measurement_module_-_arduino_mega.inoArduino Mega
727 characters
1//ekostra.com
2//electronics store in egypt
3//+201008896258
4
5// I2C wiring for Arduino Mega: D20=SDA, D21=SCL. VCC->3.3V or 5V per module label, GND->GND.
6#include <Wire.h>
7#include <Adafruit_AHTX0.h> // works for AHT10/AHT20/AHT25 - same driver family
8
9Adafruit_AHTX0 aht;
10
11void setup() {
12 Serial.begin(115200);
13 Wire.begin();
14 if (!aht.begin()) {
15 Serial.println("AHT sensor not found - check wiring!");
16 while (1) delay(10);
17 }
18}
19
20void loop() {
21 sensors_event_t humidity, temp;
22 aht.getEvent(&humidity, &temp);
23
24 Serial.print("Temperature: "); Serial.print(temp.temperature); Serial.print(" C ");
25 Serial.print("Humidity: "); Serial.print(humidity.relative_humidity); Serial.println(" %");
26
27 delay(1000);
28}
📄 File: aht10_high_precision_digital_temperature_and_humidity_measurement_module_-_esp32.inoESP32
726 characters
1//ekostra.com
2//electronics store in egypt
3//+201008896258
4
5// I2C wiring for ESP32: GPIO21=SDA, GPIO22=SCL. VCC->3.3V or 5V per module label, GND->GND.
6#include <Wire.h>
7#include <Adafruit_AHTX0.h> // works for AHT10/AHT20/AHT25 - same driver family
8
9Adafruit_AHTX0 aht;
10
11void setup() {
12 Serial.begin(115200);
13 Wire.begin();
14 if (!aht.begin()) {
15 Serial.println("AHT sensor not found - check wiring!");
16 while (1) delay(10);
17 }
18}
19
20void loop() {
21 sensors_event_t humidity, temp;
22 aht.getEvent(&humidity, &temp);
23
24 Serial.print("Temperature: "); Serial.print(temp.temperature); Serial.print(" C ");
25 Serial.print("Humidity: "); Serial.print(humidity.relative_humidity); Serial.println(" %");
26
27 delay(1000);
28}
📄 File: aht10_high_precision_digital_temperature_and_humidity_measurement_module_-_esp8266.inoESP8266
734 characters
1//ekostra.com
2//electronics store in egypt
3//+201008896258
4
5// I2C wiring for ESP8266: D2(GPIO4)=SDA, D1(GPIO5)=SCL. VCC->3.3V or 5V per module label, GND->GND.
6#include <Wire.h>
7#include <Adafruit_AHTX0.h> // works for AHT10/AHT20/AHT25 - same driver family
8
9Adafruit_AHTX0 aht;
10
11void setup() {
12 Serial.begin(115200);
13 Wire.begin();
14 if (!aht.begin()) {
15 Serial.println("AHT sensor not found - check wiring!");
16 while (1) delay(10);
17 }
18}
19
20void loop() {
21 sensors_event_t humidity, temp;
22 aht.getEvent(&humidity, &temp);
23
24 Serial.print("Temperature: "); Serial.print(temp.temperature); Serial.print(" C ");
25 Serial.print("Humidity: "); Serial.print(humidity.relative_humidity); Serial.println(" %");
26
27 delay(1000);
28}
📄 File: aht10_high_precision_digital_temperature_and_humidity_measurement_module_-_stm32.inoSTM32
741 characters
1//ekostra.com
2//electronics store in egypt
3//+201008896258
4
5// I2C wiring for STM32: PB7=SDA, PB6=SCL (Blue Pill / F103C8). VCC->3.3V or 5V per module label, GND->GND.
6#include <Wire.h>
7#include <Adafruit_AHTX0.h> // works for AHT10/AHT20/AHT25 - same driver family
8
9Adafruit_AHTX0 aht;
10
11void setup() {
12 Serial.begin(115200);
13 Wire.begin();
14 if (!aht.begin()) {
15 Serial.println("AHT sensor not found - check wiring!");
16 while (1) delay(10);
17 }
18}
19
20void loop() {
21 sensors_event_t humidity, temp;
22 aht.getEvent(&humidity, &temp);
23
24 Serial.print("Temperature: "); Serial.print(temp.temperature); Serial.print(" C ");
25 Serial.print("Humidity: "); Serial.print(humidity.relative_humidity); Serial.println(" %");
26
27 delay(1000);
28}
📄 File: aht10_high_precision_digital_temperature_and_humidity_measurement_module_-_raspberry_pi_pico.inoRaspberry Pi Pico
736 characters
1//ekostra.com
2//electronics store in egypt
3//+201008896258
4
5// I2C wiring for Raspberry Pi Pico: GPIO4=SDA, GPIO5=SCL. VCC->3.3V or 5V per module label, GND->GND.
6#include <Wire.h>
7#include <Adafruit_AHTX0.h> // works for AHT10/AHT20/AHT25 - same driver family
8
9Adafruit_AHTX0 aht;
10
11void setup() {
12 Serial.begin(115200);
13 Wire.begin();
14 if (!aht.begin()) {
15 Serial.println("AHT sensor not found - check wiring!");
16 while (1) delay(10);
17 }
18}
19
20void loop() {
21 sensors_event_t humidity, temp;
22 aht.getEvent(&humidity, &temp);
23
24 Serial.print("Temperature: "); Serial.print(temp.temperature); Serial.print(" C ");
25 Serial.print("Humidity: "); Serial.print(humidity.relative_humidity); Serial.println(" %");
26
27 delay(1000);
28}
I2C temperature + humidity sensor, AHTx0 family driver.
Adafruit AHTX0GitHub
All copy right for ekostra.com

نظرة عامة ومواصفات المنتج — بالعربية

AHT10 High Precision Digital Temperature And Humidity Measurement Module متوفر الآن في متجر إكوسترا للإلكترونيات، ضمن قسم Sensors وTemperature & Humidity Sensor، بسعر 180,00 EGP. كود المنتج لدينا: EK1373. المنتج متوفر في المخزون وجاهز للشحن الفوري لكل محافظات مصر مع إمكانية الدفع عند الاستلام.

أهم المواصفات الفنية:

  • Interface Type:: I2C
  • Working Voltage:: 1.8 – 6.0 V
  • Interface Size:: 4*2.54mm pitch
  • Humidity Accuracy:: typical ± 2%
  • Humidity Resolution:: 0.024%
  • Temperature Accuracy:: typical ± 0.3 ° C
  • Temperature Resolution:: Typical 0.01 °C
  • Working Temperature:: -40°C–85°C

هذا المنتج مناسب لمشاريع الأردوينو (Arduino) و ESP32 و Raspberry Pi، ومشاريع الروبوتات وإنترنت الأشياء والتعليم الهندسي. جميع القطع مفحوصة قبل الشحن.

تصفّح المزيد من Sensors في إكوسترا.

Specification

Specification

WeightWeight10,0000 g
Dimensions3 × 2 × 1 cm
Interface type:I2C
Working voltage:1.8 – 6.0 V
Interface size:4*2.54mm pitch
Humidity accuracy:typical ± 2%
Humidity resolution:0.024%
Temperature accuracy:typical ± 0.3 ° C
Temperature resolution:Typical 0.01 °C
Working temperature:-40°C–85°C

Customer Reviews

Related Products

DHT11 Temperature And Humidity Sensor Module with LED - Ekostra Electronics In Egypt اكوسترا الكترونيكس
Compare
Quick view
Add to cart

DHT11 Temperature And Humidity Sensor Module with LED

,
60,00 EGP
DS18B20 Temperature Sensor - Ekostra Electronics In Egypt اكوسترا الكترونيكس
New
Compare
Quick view
Add to cart

DS18B20 Temperature Sensor

,
45,00 EGP
HC-SR04 Ultrasonic Distance Sensor Module - Ekostra Electronics In Egypt اكوسترا الكترونيكس
Compare
Quick view
Add to cart

HC-SR04 Ultrasonic Distance Sensor Module

,
50,00 EGP
TCRT5000L 5 Channel Tracking Sensor Tracking Module Infrared Sensor - Ekostra Electronics In Egypt اكوسترا الكترونيكس
Compare
Quick view
Add to cart

TCRT5000L 5 Channel Tracking Sensor Tracking Module Infrared Sensor

,
180,00 EGP
Ultrasonic holder - Ekostra Electronics In Egypt اكوسترا الكترونيكس
Compare
Quick view
Add to cart

Ultrasonic holder

,
25,00 EGP
Water Level Depth Detection Sensor for Arduino - Ekostra Electronics In Egypt اكوسترا الكترونيكس
Compare
Quick view
Add to cart

Water Level Depth Detection Sensor for Arduino

,
30,00 EGP