Sensors
MAX9814 Microphone Amplifier Module with Auto-Gain Control for Arduino
240,00 EGPThe MAX9814 Microphone Amplifier Module with Auto-Gain Control is an advanced audio sensor designed for Arduino projects. It features an integrated electret microphone and automatic gain control, providing consistent audio signal levels across varying sound intensities. This module is perfect for applications involving sound detection, voice activation, and audio signal processing.
Features:
- Auto-Gain Control: Automatically adjusts amplification to keep audio levels stable.
- High-Sensitivity Microphone: Captures clear and accurate sound.
- Adjustable Gain: Fine-tune the gain with an onboard potentiometer.
- Analog Output: Provides a direct analog signal for easy integration with Arduino.
- Wide Voltage Range: Operates from 2.7V to 5.5V, compatible with various power sources.
- Compact Size: Small and lightweight for easy integration into projects.
MH-ET LIVE MAX30100 Heart Rate Oximetry Sensor Module Heart Rate Sensor Breakout Ultra-Low Power
110,00 EGP-
Combines pulse oximeter and heart rate sensor in one module
-
Based on the MAX30100 integrated circuit
-
Communicates via I2C interface (address: 0x57)
-
Ultra-low power consumption – ideal for wearable and battery-powered applications
-
Includes red & infrared LEDs, photodetector, and ambient light rejection circuitry
-
Compatible with Arduino, ESP32, STM32, Raspberry Pi, and other platforms
-
Compact size – easy to embed in health monitoring devices
Microphone 9*7mm
7,00 EGP- Low noise
- Low power consumption
- Frequency Range: 50 – 20KHz
- Microphone sensitivity 56 – 58DB
- Multi-Channel
MPU6500 6-Axis Attitude Gyro + Accelerometer Sensor Module | I²C/SPI Interface
300,00 EGP- Accelerometer, Gyroscope
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- 9 DOF modules
MQ-135 Air Quality/Gas Detector Sensor Module For Arduino
100,00 EGP- Detects multiple gases: NH₃, benzene, alcohol, CO₂, NOₓ, smoke
- Provides analog and digital outputs
- Operates at 5V DC
- Adjustable sensitivity via onboard potentiometer
- Requires preheating (~24 hours) for accurate readings
- Compact and easy to integrate
MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
85,00 EGP- Detects smoke, LPG, butane, hydrogen, and other combustible gases
- Provides analog and digital output signals
- Fast response and high sensitivity
- Compatible with Arduino and other microcontrollers
- Easy to calibrate and use in gas leak detection projects
- Operates at 5V power supply
- Ideal for safety and environmental monitoring systems
MQ-5 Gas Sensor Module
80,00 EGP- Detects LPG, methane, natural gas, and propane
- Dual output: analog and digital signals
- Operates at 5V with low power consumption
- Adjustable sensitivity via onboard potentiometer
- Fast response and recovery time
- Compact and easy to integrate
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
90,00 EGP- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
MT6701 14-Bit Magnetic Angle Sensor Module (AS5600 Alternative)
300,00 EGP- 🧲 14-bit magnetic angle sensor for precise rotation measurement
- 🎯 Smooth, high-resolution output (AS5600 alternative)
- 🧩 Ideal for knobs, robotics joints, gimbals, and encoders
- 🚌 I2C interface for easy connection to microcontrollers
- ⚡ Low power operation—great for portable/always-on systems
- 📐 Works with common diametric magnets for angle sensing
- 🛠️ Compact module—easy to mount and integrate
- ✅ Great choice for contactless angle sensing with long life
NJK-5002C Hall Effect Sensor – NPN NO 3-Wire Magnet | Arduino Compatible
245,00 EGP- NPN Normally Open (NO) magnetic switch
- 3-wire connection: VCC, GND, Output
- Wide voltage range: 4.5V–30V DC
- Built-in LED indicator for magnetic detection
- Fast, non-contact sensing
- Compatible with Arduino and other microcontrollers
- Durable and compact M12 threaded design
NTC Thermistor 10K ±5% 3950K P=1.7mm (MF52A103J3950
4,00 EGP- Accurate temperature sensing
- Stable and reliable performance
- Fast thermal response
- Compact size for easy integration
- Wide operating temperature range
- Suitable for control and monitoring circuits
- Ideal for Arduino and industrial applications
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
