Shop
Panasonic 3V Lithium Battery CR2016
20,00 EGP- 🔋 Panasonic 3V lithium coin cell (CR2016)
- ⚡ Stable, dependable 3V output for small devices
- 📏 Compact size: 20mm × 1.6mm
- ⏳ Long shelf life—great for standby and backup power
- 🛡️ Leak-resistant design for safer storage and reliability
- 🧠 Ideal for key fobs, remotes, calculators, and sensors
- ❄️ Performs well across wide temperature ranges
- ✅ Genuine Panasonic quality for consistent performance
Panasonic 3V Lithium Battery CR2025
16,00 EGP- 🔋 Panasonic 3V lithium coin cell (CR2025)
- ⚡ Stable, reliable power for everyday electronics
- 📏 Standard size: 20mm × 2.5mm
- ⏳ Long shelf life—great for standby devices
- 🛡️ Leak-resistant design for safer storage and use
- 🧠 Ideal for key fobs, scales, calculators, and sensors
- ❄️ Performs well across wide temperature ranges
- ✅ Genuine Panasonic quality for consistent performance
Panasonic 3V Lithium Battery CR2032
16,00 EGP- 🔋 Panasonic 3V lithium coin cell (CR2032)
- ⚡ Stable, dependable power for long-term use
- 📏 Standard size: 20mm × 3.2mm
- ⏳ Long shelf life—great for backup/standby devices
- 🛡️ Leak-resistant design for safer storage and reliability
- 🧠 Ideal for CMOS/BIOS, key fobs, remotes, and IoT sensors
- ❄️ Performs well across wide temperature ranges
- ✅ Genuine Panasonic quality for consistent performance
PCB board Line FR2 7X9 cm2
20,00 EGP- 🟤 FR2 PCB prototyping board (stripboard / line board)
- 📏 Size: 7 × 9 cm for compact DIY circuits
- 🔩 Copper strip tracks for quick soldering without etching
- 🛠️ Easy to cut tracks to create custom connections
- 🧩 Ideal for prototypes, repairs, and small electronics projects
- 📦 FR2 phenolic material—lightweight and cost-effective
- 🔌 Works great with through-hole components
- ✅ Perfect for Arduino modules and general circuit building
PCB LINE IC FR2 (9X15 cm2)
30,00 EGP-
Pre-etched copper tracks for ICs and components
-
Optimized for DIP packages, resistors, and capacitors
-
Made from FR2 phenolic paper – easy to cut and drill
-
9×15 cm² single-layer board for prototyping
-
Standard 2.54mm hole pitch for through-hole components
-
Ideal for educational, DIY, and quick prototyping projects
PCB LINE IC FR2 (9×7 cm2)
28,00 EGPPCB LINE IC FR2 (9x7cm)
1. Material: FR2 (Phenolic Paper)
2. Dimensions: 9cm x 7cm (90mm x 70mm)
3. Layer Type: Single-sided (Copper Clad)
4. Thickness: 1.2mm – 1.6mm
PCB Single Layer FR2 (10X15 cm2)
25,00 EGP-
Single-sided copper-clad PCB for custom circuit design
-
Made from FR2 phenolic resin – easy to cut, drill, and shape
-
10×15 cm² large size – suitable for bigger prototypes
-
Compatible with manual and chemical etching methods
-
35µm copper thickness for reliable conductivity
-
Ideal for students, hobbyists, and professionals in electronics
PCB Single Layer FR4 (10X10 cm2)
25,00 EGP- Single-layer copper-clad board for custom PCB etching
- FR4 fiberglass epoxy material ensures durability and heat resistance
- Standard 100×100mm (10×10 cm²) prototyping size
- Easy to cut, drill, and etch for DIY circuit designs
- Bare copper finish for full customization
- Great for prototyping, educational use, and soldering practice
Perforated holes PCB 13.3 * 4.8CM universal circuit board
25,00 EGP- 🟩 Universal perforated PCB board (through-hole)
- 📏 Size: 13.3 × 4.8 cm for slim projects
- 🕳️ Perforated hole grid for flexible component placement
- 🛠️ Easy soldering for DIY circuits and prototypes
- 🧩 Ideal for Arduino modules, sensors, and small projects
- 🔩 Great for building custom circuits without making a PCB
- 📦 Durable board for long-term prototype use
- ✅ Perfect for repairs, experiments, and electronics learning
Photo Resistor Sensor LDR 5mm GL5549 80kΩ~150kΩ P=3.4mm
6,00 EGP- High sensitivity photoresistor (LDR)
- Fast 30ms response time
- 540nm spectral peak
- 80–150KΩ at 10 Lux light resistance
- 20MΩ dark resistance
- Wide temp range: -30℃ to +70℃
- Epoxy resin sealed for durability
PIC16F628A-I/P
100,00 EGP- 8-bit PIC microcontroller with 14-bit instruction set
- Flash memory: 2K words program storage
- RAM: 224 bytes | EEPROM: 128 bytes
- Operating speed: up to 20 MHz
- I/O pins: 16 (with individual direction control)
- Built-in peripherals: USART, CCP, timers, comparators
- Operating voltage: 2.0V – 5.5V
- Package: 18-pin DIP (I/P) for easy prototyping
- Low-power features with sleep mode
PIC16F877A-I/P
220,00 EGP-
8-bit Microchip PIC microcontroller with 14 KB Flash
-
368 Bytes RAM and 256 Bytes EEPROM
-
10-bit 8-channel ADC
-
USART, SPI, I2C communication interfaces
-
Up to 20 MHz clock speed
-
40-pin PDIP package suitable for prototyping
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
