Shop
PS2 Joystick Module Breakout Sensor
40,00 EGPPS2 Joystick Module Breakout Sensor
1. Axes: 2 (X and Y, ~10kΩ potentiometers)
2. Button: Integrated push-down switch
3. Operating Voltage: 5V
4. Compatibility: Arduino, Raspberry Pi, other microcontrollers
New
Push Button Momentary Switch Square Shape 2 Pin DS-430
7,00 EGPDS-430 Square Push Button Switch
1. Type: Momentary Push Button
2. Shape: Square
3. Pins: 2
4. Model: DS-430
5. Mounting: PCB / Through-hole
QTR-8RC Reflectance Line Follower Sensor Array
160,00 EGP- 🧭 QTR-8RC reflectance sensor array for line following
- 🔦 8 IR LED/phototransistor sensors for accurate tracking
- ⚡ RC output—easy reading with any microcontroller GPIO
- 📏 Great for detecting lines, edges, and reflectance changes
- 🎯 High sensitivity with adjustable calibration in code
- 🤖 Ideal for line follower robots and maze solvers
- 🛠️ Simple mounting holes—robot-friendly form factor
- ✅ Works well with Arduino, ESP32, STM32, Raspberry Pi
Raindrop Detection Sensor Module
80,00 EGP- Operating voltage: 5V
- Provide both digital and analog output
- Adjustable sensitivity
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- Bolt holes for easy installation
Raspberry Pi 4 Case
200,00 EGP- ✅ Fits Raspberry Pi 4 Model B – custom cutouts for all ports
- 🖤 Matte black ABS plastic – sleek, strong, and professional
- 🛠️ Snap-fit assembly – tool-free and easy to install
- 🌬️ Built-in ventilation – supports passive cooling
- 🧩 Full GPIO & port access – no need to open the case
- 💻 Compact & lightweight – perfect for desktop or embedded use
- 🔧 Ideal for protection, housing, and Raspberry Pi projects
Raspberry Pi Pico (RP2040)
560,00 EGP- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Onboard temperature sensor
New
Raspberry Pi Pico W
750,00 EGP- RP2040 microcontroller with 2MB of flash memory
- On-board single-band 2.4GHz wireless interfaces (802.11n)
- Micro USB B port for power and data (and for reprogramming the flash)
- 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
- Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
- 23 GPIO are digital-only, with three also being ADC capable
Raspberry Pi Pico W Type-C – RP2040 Dual-Core Microcontroller Board
750,00 EGPRP2040 dual-core microcontroller board for fast, responsive projects
Built-in Wi-Fi (Pico W) for IoT and wireless control
USB Type-C for easier power + programming
Ideal for MicroPython/C/C++ prototyping and embedded development
RCWL-0516 Microwave Radar Motion Sensor Module – 3.3V Output
75,00 EGPProduct Highlights
- Microwave Doppler Tech: Advanced motion detection that works through walls, wood, and plastic.
- Superior to PIR: Not affected by ambient temperature; provides higher sensitivity and longer range.
- 3.3V Logic Output: Direct plug-and-play compatibility with ESP32, STM32, and Raspberry Pi.
- Wide Operating Voltage: Flexible power input from 4V to 28V DC (5V recommended).
- 360° Detection: Capable of sensing motion in all directions with a range of up to 7 meters.
- All-Weather Reliability: Works perfectly in total darkness or high-heat environments.
Red Plastic Propeller 80mm 3 Blades
25,00 EGP- 🔴 Red plastic propeller with 3 blades
- 📏 Size: 80mm for compact airflow/thrust applications
- 🌀 3-blade design for smooth, stable airflow
- ⚙️ Compatible with small DC motors (with matching shaft)
- 💨 Good for DIY fans, air propulsion, and experiments
- 📦 Lightweight build for efficient rotation
- 🛠️ Easy to install on suitable motor adapters
- ✅ Ideal for STEM, robotics, and prototyping projects
Reed Switch (Magnetic Switch) – Normally Open (N.O.)
15,00 EGP- Normally Open (N.O.) Contact closes in presence of magnetic field
- Simple 2-Pin Design for easy circuit integration
- Fast Response Time with no physical contact required
- Compact Glass Tube Construction for durability
- Ideal for Door Sensors, Security Systems, and Automation Projects
Reed Switch Module
45,00 EGP- 🧲 Reed switch module for magnetic sensing
- 🔁 Detects magnet presence (open/close switch action)
- ⚡ Digital output—easy to read with Arduino/MCU GPIO
- 🛠️ Simple 3-pin interface: VCC, GND, OUT
- 🚪 Ideal for door/window sensors and security alarms
- 🧩 Great for position sensing, counters, and limit switches
- 📦 Compact module—breadboard friendly
- ✅ Perfect for smart home and DIY automation projects
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
