Shop
Servo Motor PTZ Pan/Tilt Bracket Platform with Anti-Vibration Design
40,00 EGP- Dual-axis control – supports pan & tilt movement
- Servo-compatible – fits SG90, MG90, MG90S micro servos
- Anti-vibration design – improves stability for cameras/sensors
- Lightweight & durable – ideal for mobile robotics and drones
- Easy assembly – comes with pre-drilled holes and mounting hardware
- Versatile use – great for face tracking, surveillance, and object following
- Modular structure – integrates smoothly into Arduino/IoT setups
- Perfect for automation – mounts sensors, lasers, or mini cameras with ease
Servo Tester (3CH 4.8-6V)
110,00 EGP- Tests up to 3 servos or ESCs at once
- Supports Manual, Neutral & Auto modes
- Works with 4.8V–6V DC power
- LED mode indicator
- Compact, lightweight, easy to use
- Great for servo testing and ESC calibration
SI4432 240-930MHz Wireless Transceiver Module with Antenna (1000m Range)
350,00 EGPLong-range 1000m wireless transceiver module covering 240-930MHz with integrated antenna for reliable IoT and telemetry projects.
SIM800C GSM GPRS Module
400,00 EGP- 📶 SIM800C GSM/GPRS module for cellular connectivity
- 📱 Supports calls, SMS, and GPRS data (2G network)
- 🔌 UART interface controlled via AT commands
- ⚡ Low power design suitable for embedded projects
- 🧩 Ideal for IoT monitoring, trackers, and SMS notification systems
- 📡 Works with Arduino, ESP32, STM32 via serial connection
- 📦 Compact module—easy to integrate into devices
- ✅ Reliable choice for GSM communication projects
SIM800L Quad-Band GPRS GSM Module with Antenna
310,00 EGP-
Quad-band GSM/GPRS module (850/900/1800/1900 MHz)
-
Low power consumption with sleep mode (~1mA)
-
Supports voice, SMS, and GPRS data
-
UART interface with AT command set
-
Compact size with antenna connector
-
Suitable for IoT and embedded applications
SK12D07VG3 Slide Switch Right-Angle SPDT 50V 0.5A Plugin for PCB
4,00 EGPSK12D07VG3 Slide Switch (Right-Angle SPDT)
1. Type: Right-Angle Slide Switch
2. Circuit: SPDT (Single Pole Double Throw)
3. Rating: 50V, 0.5A
4. Mounting: PCB Plug-in (right-angle)
5. Model: SK12D07VG3
Slide Switch (3 Pin – SPDT)
5,00 EGPSlide Switch (3 Pin – SPDT)
1. Type: Slide Switch
2. Circuit: SPDT (Single Pole Double Throw)
3. Pins: 3
4. Mounting: Through-hole / Panel
5. Use: Manual ON-ON circuit selection
Sliding Adjustable Potentiometer Module 10k
135,00 EGP- 🎚️ 10KΩ sliding potentiometer module (linear fader)
- 📏 Smooth slider control for easy adjustment
- 🔌 3-pin output: VCC / GND / Analog signal
- ⚡ Perfect as a voltage divider for analog input reading
- 🎛️ Great for volume, brightness, speed, and tuning control
- 🧩 Works with Arduino, ESP32, STM32, Raspberry Pi ADC
- 🛠️ Breadboard-friendly module for quick prototyping
- ✅ Ideal for mixers, controllers, and DIY interface panels
Soil Moisture Meter Sensor for Arduino
75,00 EGPSoil Moisture Meter Sensor for Arduino
1. Sensing Method: Resistive (dual probe)
2. Output Type: Analog
3. Probe Dimension: Approx. 6cm x 3cm
4. Compatibility: Arduino and other microcontrollers
Solar cell 2.5V
40,00 EGP- 2.5V Output Voltage suitable for low-power electronics
- Compact Size ideal for small DIY and educational projects
- Environmentally Friendly renewable energy source
- Easy to Connect with solder pads or wires
- Perfect for Charging Small Batteries or Powering Microcontrollers
Solar Panel 1W 5V
200,00 EGP- 1 Watt power output at ~5V
- Compact and easy to integrate
- Renewable and clean solar energy source
- Ideal for small-scale solar and battery charging projects
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
