Shop
Speed Measuring Sensor Groove Coupler Module For Arduino
60,00 EGP- ⏱️ Speed measuring sensor groove coupler module for Arduino
- 🔦 IR slot (photo-interrupter) sensor for pulse counting
- ⚙️ Measures RPM using encoder disks/wheels through the slot
- 📈 Digital output—easy to read with MCU interrupt pins
- 🧩 Ideal for motor speed feedback and robotics projects
- ⚡ Works with 3.3V/5V systems (module dependent)
- 🛠️ Simple wiring: VCC, GND, OUT
- ✅ Perfect for tachometer and encoder-based measurements
ST-Link V2 Programmer for STM8 / STM32
250,00 EGPST-Link V2 programmer with SWD/SWIM support for STM8 and STM32 microcontrollers.
Stainless Steel Straight Tweezer TS-10
15,00 EGP-
Precision Straight Tips ideal for gripping small components
-
Durable Stainless Steel Construction resists rust and maintains strength
-
Non-Magnetic & Non-Acidic Finish suitable for electronics and lab work
-
Ergonomic Design with tension-balanced arms for steady handling
-
Perfect for SMD Work, Jewelry Making, Model Building, and Delicate Tasks
Stainless Steel Tweezers Set TS-9803
60,00 EGP- 3-piece precision tweezer set
- High-quality stainless steel construction
- Anti-static and corrosion-resistant
- Fine tips for detailed work
- Ideal for electronics, crafts, and repairs
Standard 12V 5A 60W Power Supply with 5.5mm DC Plug
200,00 EGP- 🔌 Standard AC-to-DC power supply adapter
- ⚡ Output: 12V / 5A (60W) for high-power loads
- 🔩 Includes 5.5mm DC barrel plug (commonly 5.5×2.1mm)
- 🧩 Ideal for LED strips, CCTV, routers, and DIY electronics
- 🛡️ Built-in protection: over-current / over-voltage / short-circuit
- 📦 Compact adapter—easy to use and carry
- 🔥 Stable regulated output for reliable performance
- ✅ Great power source for motors, controllers, and projects
Stem Zone Arduino Package Learning Kit1
Original price was: 2.076,00 EGP.1.945,00 EGPCurrent price is: 1.945,00 EGP.
|
Original price was: 250,00 EGP.225,00 EGPCurrent price is: 225,00 EGP.
|
|
|
......
|
|
|
440,00 EGP
|
|
|
50,00 EGP
|
|
|
25,00 EGP
|
|
|
1,00 EGP
|
|
|
......
|
|
|
75,00 EGP
|
|
|
45,00 EGP
|
|
|
25,00 EGP
|
|
|
50,00 EGP
|
|
|
10,00 EGP
|
|
|
10,00 EGP
|
|
|
......
|
|
|
70,00 EGP
|
|
|
60,00 EGP
|
|
|
225,00 EGP
|
|
|
175,00 EGP
|
Original price was: 2.076,00 EGP.1.945,00 EGPCurrent price is: 1.945,00 EGP.
Stepper Motor 5V
70,00 EGP- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm
Stepper Motor Cable (6pin to 4pin ) 1m
40,00 EGPStepper Motor Cable (6pin to 4pin) 1m
1. Connector A: 6-Pin (Motor side, JST-PH 2.0mm)
2. Connector B: 4-Pin (Driver side, Dupont 2.54mm)
3. Cable Length: 1 meter
4. Compatibility: Standard NEMA 17 Steppers (4-wire)
5. Conductor Material: Stranded Copper
Stereo Jack Male 3.5mm 3 Pole Audio Connector
45,00 EGP- 🎧 3.5mm stereo male audio jack (3-pole TRS)
- 🔊 Supports Left / Right audio + Ground connection
- 🧩 Ideal for headphones, speakers, AUX cables, DIY audio
- 🛠️ Easy solder terminals for quick wiring and repairs
- 🔌 Universal compatibility with 3.5mm stereo ports
- 📦 Compact, durable connector for portable projects
- 🛡️ Stable contact for clear audio and less noise
- ✅ Perfect for making custom audio leads and adapters
STM32F103C8T6 32-Bit ARM Development Board
250,00 EGPSTM32F103C8T6 ARM Cortex-M3 development board with 72MHz CPU and rich peripherals.
STM32F401RCT6 – STM32 Development Board (The Black Pill)
350,00 EGPProduct Highlights
- High-Performance Core: ARM Cortex-M4 32-bit RISC core operating at 84 MHz.
- Memory Power: 256KB Flash memory and 64KB SRAM for complex embedded applications.
- Modern Connectivity: Integrated USB Type-C for both power and high-speed data.
- Hardware Acceleration: Built-in Floating Point Unit (FPU) for fast mathematical calculations.
- Breadboard Friendly: Compact “Black Pill” design with a dual-row 40-pin layout.
- RTC Ready: Onboard 32.768kHz low-speed crystal for real-time clock applications.
Strong Neodymium Magnets Bar, 30x10x5mm
15,00 EGP- 🧲 Strong neodymium bar magnets
- 📏 Size: 30 × 10 × 5 mm
- 💪 High holding force for fixing and mounting tasks
- 🔩 Ideal for DIY projects, fixtures, and tool organization
- 🧩 Great for sensors/encoders and magnetic mechanisms
- 🛡️ Nickel-coated surface for corrosion resistance (common type)
- 📦 Compact bar shape—easy to place in tight spaces
- ✅ Perfect for workshop, crafts, and electronics builds
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
