Semiconductor ICs
IC Socket 14 14 Narrow – Base 28 pin
4,00 EGP- 28-pin (14+14 narrow) dual-row configuration for compact IC mounting
- 2.54mm standard pitch through-hole design for easy PCB integration
- Gold-plated contacts for reliable, low-resistance connections
- Ideal for IC prototyping, testing, and development boards
- Allows tool-free IC replacement – no soldering required
- Durable plastic housing with good thermal and mechanical stability
- Suitable for low-power ICs in embedded and general-purpose electronics
- Operating temperature: -20°C to +85°C
IC Socket 4+4 Narrow – Base 8 pin
1,50 EGP-
8-pin (4+4) narrow DIP layout for op-amps, timers, and signal ICs
-
Standard 2.54mm pitch, ~7.62mm row spacing
-
Protects ICs from heat damage during soldering
-
Through-hole mounting for firm PCB installation
-
Durable phosphor bronze contacts with tin plating
-
Reusable and secure connection for easy IC replacement
-
Perfect for DIY, repairs, and prototyping
-
Compatible with ICs like NE555, LM358, LM324
IC Socket 7+7 Narrow – Base 14 pin
2,00 EGP- 14-pin (7+7) narrow dual-row DIP layout
- Compatible with standard 14-pin ICs (NE555, op-amps, logic gates)
- 2.54mm pin pitch with ~7.62mm row spacing
- Prevents IC damage during soldering
- Ideal for prototyping, repairs, and DIY circuits
- Through-hole mounting for firm PCB attachment
- Reusable and heat-resistant construction
- Durable phosphor bronze contacts with tin plating
IC Socket 8+8 Narrow – Base 16 pin
2,00 EGP- 16-pin (8+8) narrow dual-row layout for DIP ICs
- 2.54mm pitch with standard 7.62mm row spacing
- Ideal for microcontrollers, logic ICs, EEPROMs, op-amps
- Prevents heat damage during soldering – perfect for prototyping
- Tool-free IC replacement – ideal for testing and development
- Durable phosphor bronze contacts with tin or gold plating
- Through-hole mounting for secure PCB integration
- Suitable for DIY, repair, and embedded systems
IRF530N 17A, 100V, 0.064 Ohm, N-Channel Power MOSFET
25,00 EGP-
100V, 17A N-Channel Power MOSFET
-
Low R<sub>DS(on)</sub>: 0.064Ω for reduced power loss
-
Fast switching performance
-
TO-220 package for easy heat management
-
Ideal for power control, switching, and motor drive circuits
IRFZ44N 49A, 55V, 0.0175 Ohm, N-Channel Power MOSFET .
20,00 EGP-
49A, 55V N-Channel MOSFET
-
Ultra-low R<sub>DS(on)</sub>: 0.0175Ω – high efficiency
-
Fast switching with low gate drive
-
TO-220 package – easy to mount & cool
-
Perfect for motor drivers, inverters, and DC switching
IRFZ740N 33A, 100V, 0.040 Ohm, N-Channel Power MOSFET
25,00 EGP-
100V, 33A N-Channel Power MOSFET
-
Low R<sub>DS(on)</sub>: 0.040Ω – Efficient current handling
-
Fast switching, high input impedance
-
TO-220 package with heatsink compatibility
-
Perfect for power regulation, motor control, and SMPS
L293D 2-Channel Driver H-bridge
35,00 EGP✅ Dual-channel H-bridge motor driver
✅ 36V, 600mA per channel (1.2A peak)
✅ TTL/CMOS compatible logic inputs
✅ Internal protection diodes
✅ Ideal for Arduino, Raspberry Pi, and small robotics
L298N DUAL FULL-BRIDGE DRIVER
55,00 EGP✅ Dual Full-Bridge (H-Bridge) Driver
✅ 46V, 2A Continuous per Channel
✅ Drives DC motors, stepper motors, and inductive loads
✅ TTL/CMOS Compatible Inputs
✅ Built-in Diode and Thermal Protection
✅ Ideal for Arduino, Raspberry Pi, and Robotics
LM339 Quad Differential Comparator
8,00 EGP- ⚖️ Quad differential comparator in one IC (4 channels)
- ⚡ Wide supply range for flexible power options
- 🔎 High sensitivity for precise threshold detection
- 🧩 Ideal for sensor triggering, zero-crossing, level detection
- 🚪 Open-collector outputs—easy pull-up for logic interfacing
- 📡 Works well with 3.3V/5V microcontrollers and TTL/CMOS
- 🛠️ Simple to build Schmitt triggers and window comparators
- 📦 Common DIP/SMD package options for prototyping/production
LM358P PDIP-8 High Gain Operational Amplifier
10,00 EGPProduct Highlights
- Dual Operational Amplifier: Two independent, high-gain op-amps in a single 8-pin package.
- Single Supply Range: Operates reliably from a wide range of 3V to 32V (or ±1.5V to ±16V).
- Low Power Consumption: Minimal drain current makes it ideal for battery-operated portable devices.
- Internal Frequency Compensation: Built-in stability features reduce the need for external components.
- Large DC Voltage Gain: High gain of up to 100dB for precise signal amplification.
- Industry Standard PDIP-8: Easy-to-solder through-hole package, perfect for breadboards and DIY PCBs.
LM393 Dual Differential Comparator
8,00 EGP- ⚖️ Dual differential comparator (2 channels) in one IC
- ⚡ Wide operating voltage for flexible power designs
- 🔎 Accurate threshold detection for analog signals
- 🚪 Open-collector outputs—easy pull-up to 3.3V/5V logic
- 🧩 Perfect for sensor modules, level/over-voltage detection
- ⚡ Fast response for pulse and edge detection circuits
- 🛠️ Great for building Schmitt triggers and window comparators
- 📦 Easy to use in breadboard prototypes and embedded projects
Recently Viewed Products
Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies
Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.
