الحساسات (Sensors) هي عيون وآذان أي مشروع إلكتروني. في إكوسترا تلاقي حساسات الحرارة والرطوبة، المسافة والحركة (PIR والموجات فوق الصوتية)، الغاز والدخان، الضوء، التيار، الضغط، ونبض القلب — متوافقة مع Arduino و Raspberry Pi و ESP32. مثالية لمحطات الطقس، أنظمة الإنذار، البيوت الذكية، ومشاريع إنترنت الأشياء.
From distance and motion to temperature, gas, and biometric sensing, this is the starting point for every sensor module we carry — browse by sensing type below to find the right part for your project.

Sensors

12mm 12528 LDR,10-20K

15,00 EGP

✅ 12mm CdS photoresistor
✅ 10k–20k Ω resistance in dark
✅ Sensitive to visible light (peak ~520 nm)
✅ Fast response time (~10 ms)
✅ Ideal for light sensing and automation

20A range Current Sensor Module ACS712

100,00 EGP

20A range Current Sensor Module ACS712
1. Current Range: 20A AC/DC
2. Type: Hall-effect based linear sensor
3. Sensitivity: 100 mV/A
4. Output: Analog voltage proportional to current
5. Features: Electrical isolation, low offset

3 Channel Path Tracing Module

150,00 EGP

3-channel IR line tracking module with adjustable sensitivity for robot path detection.

30A range Current Sensor Module ACS712

100,00 EGP

30A range Current Sensor Module ACS712
1. Current Range: 30A AC/DC
2. Type: Hall-effect based linear sensor
3. Sensitivity: 185 mV/A
4. Output: Analog voltage proportional to current
5. Features: Electrical isolation, low offset

4 Channel Infrared Tracking Module

160,00 EGP
  1. Working voltage (V): 3.3 ~ 5
  2. Working current (A): Above 1A
  3. Operating Temperature (℃): -10 ~ +50
  4. Mounting hole: M3
  5. Detection range: 1mm ~ 60 cm adjustable.
4-Pin Light-Dependent Photosensitive Sensor LDR Module - Ekostra Electronics In Egypt اكوسترا الكترونيكس
-13%

-13% OFF

4-Pin Light-Dependent Photosensitive Sensor LDR Module

Original price was: 40,00 EGP.Current price is: 35,00 EGP.

4-pin LDR photosensitive sensor module with adjustable light detection sensitivity.

4PIN IR Infrared Flame Detection Sensor Module

35,00 EGP

IR flame detection sensor module with adjustable sensitivity for Arduino and Raspberry Pi.

5-Channel Flame Sensor Module

150,00 EGP
  1. Detecting range: >120 degree
  2. Analog and digital outputs
  3. On-board potentiometer and indicators
  4. 1% resistors to make this module more reliable and precise
  5. Operating Voltage: 3.3V – 9V
  6. Board Diameter: 40 mm.

5A range Current Sensor Module ACS712

100,00 EGP
  • ⚡ ACS712 current sensor module (5A range)
  • 🔁 Measures AC/DC current with Hall-effect sensing
  • 📈 Analog voltage output proportional to current
  • 🧩 Ideal for Arduino/MCU current monitoring and protection
  • 🛡️ Electrical isolation between load and measurement circuit
  • ⚡ Low resistance conduction path for minimal power loss
  • 🛠️ Easy wiring: VCC, GND, OUT + IP+/IP- terminals
  • ✅ Great for power supplies, motors, and battery monitoring

AHT10 High Precision Digital Temperature And Humidity Measurement Module

180,00 EGP
  1. Interface type: I2C
  2. Working voltage: 1.8 – 6.0 V
  3. Interface size: 4*2.54mm pitch
  4. Humidity accuracy: typical ± 2%
  5. Humidity resolution: 0.024%
  6. Temperature accuracy: typical ± 0.3 ° C

Analog PH Sensor Kit

1.800,00 EGP
  1. Module power supply: 5 VDC.
  2. Measuring temperature: 0-50 ℃.
  3. Response time: ≤ 1min.
  4. pH sensor with BNC connector.
  5. Gain adjustment Potentiometer.
  6. Power indicator LED.

AS5600 Magnetic Encoder Module (12-bit Precision)

250,00 EGP
  • 🧲 AS5600 magnetic rotary encoder module (12-bit)
  • 🎯 High resolution: 4096 steps per revolution
  • 🔁 Contactless sensing for long life and smooth tracking
  • 🚌 I2C interface for easy microcontroller connection
  • 📈 Provides angle, speed, and position feedback
  • 🧩 Ideal for knobs, robots, gimbals, and motor control
  • ⚡ Low power—great for battery-powered projects
  • ✅ Works with Arduino, ESP32, STM32, Raspberry Pi

Sensors are what let a microcontroller perceive the physical world - light, distance, motion, temperature, pressure, and more - turning a real-world condition into an electrical signal your code can read and act on. Our sensor range spans simple analog modules that output a single voltage, to fully digital I2C/SPI sensors with onboard processing, to specialized biometric and environmental sensors for more advanced builds. If you know exactly what you're measuring, use the subcategories to narrow down to the right sensor type.

Ekostra Electronics | Microcontrollers, Sensors & 3D Printing Supplies

Shop top-quality Arduino, ESP32 & hardware in Egypt. Build your DIY and engineering projects with fast local shipping and cash on delivery.